THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Kimber of Oregon M84 bolt disassembly
 Login/Join
 
one of us
posted
I need to disassemble the bolt of a Kimber of Oregon Model 84 (.223). There appears to be a tiny roll pin at the rear of the shroud, and the sear piece on bottom appears to have a tiny hex set. I'd greatly appreciate guidance on how to do this disassembly since I've never messed with one of these previously.

THANKS!
 
Posts: 13258 | Location: Henly, TX, USA | Registered: 04 April 2001Reply With Quote
one of us
posted Hide Post
Anybody know how to tackle taking this bolt down?
 
Posts: 13258 | Location: Henly, TX, USA | Registered: 04 April 2001Reply With Quote
One of Us
posted Hide Post
That pin is actually the cocking cam,,,it's a LH thread
 
Posts: 2221 | Location: Tacoma, WA | Registered: 31 October 2003Reply With Quote
one of us
posted Hide Post
So do I need to remove either the cross pin at the rear of the bolt shroud, or the bottom screw, or both?
 
Posts: 13258 | Location: Henly, TX, USA | Registered: 04 April 2001Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia