THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
the magazine on Win 70
 Login/Join
 
One of Us
Picture of JohnHunt
posted
I have a Win 70 Safari 375H&H.

Installed a McMillan stock and Sunny Hill drop belly. This required that I shave the ears off the magazine (about 1/4").

Now I have gone and refinished the original wood stock with a nice Purdy finish and want to be able to move the action back and forth depending on hunting circumstances.

Do I need a new magazine to reuse the old stock and magazine cover?

I think the answer is whether the magazine is a supporting member for the action or not.

Thanks.

John
 
Posts: 1678 | Registered: 16 November 2006Reply With Quote
one of us
Picture of Toomany Tools
posted Hide Post
You'll need a magazine. The triggerguard and the floorplate engage those notches you ground off and the magazine provides the correct spacing beteen the receiver and the bottom metal parts. without the notches things will not mesh together the way they're supposed too.


John Farner

If you haven't, please join the NRA!
 
Posts: 2946 | Location: Corrales, NM, USA | Registered: 07 February 2001Reply With Quote
one of us
posted Hide Post
JohnHunt,

There is two versions of the magazine used in the 375 H&H. There should be eather letters or numbers on the side of the magazine. Make sure the magazine designation on your replacement magazine matches your existing magazine. They are not interchangeable.

Headache
 
Posts: 158 | Location: Danbury, CT 06810 USA | Registered: 25 March 2002Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia