THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
M-1 Garand
 Login/Join
 
One of Us
Picture of vapodog
posted
I have an M-1 Garand and the bore has been welded shut. I have a new barrel for it and am wanting someone to remove the old welded barrel and install the new one.

Does anyone out there want this job?


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
 
Posts: 28849 | Location: western Nebraska | Registered: 27 May 2003Reply With Quote
One of Us
posted Hide Post
I believe the CMP now has a custom shop that does just what you need... among other things.


Shoot Safe,
Mike

NRA Endowment Member

 
Posts: 980 | Location: Middle Georgia | Registered: 06 February 2011Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by vapodog:
I have an M-1 Garand and the bore has been welded shut. I have a new barrel for it and am wanting someone to remove the old welded barrel and install the new one.

Does anyone out there want this job?


I can do it for you. I install short chambered barrels on M1's and M14's all the time. Is it just the bore plugged with weld, or is the barrel tacked to the receiver?
 
Posts: 245 | Registered: 24 August 2008Reply With Quote
One of Us
Picture of vapodog
posted Hide Post
quote:
Originally posted by Uncle Grinch:
I believe the CMP now has a custom shop that does just what you need... among other things.

Possibly, but I was unable to find it.


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
 
Posts: 28849 | Location: western Nebraska | Registered: 27 May 2003Reply With Quote
One of Us
Picture of dpcd
posted Hide Post
Probably a drill rifle; specs called for the barrel to be welded to the receiver; they usually are to varying degrees.
 
Posts: 17364 | Location: USA | Registered: 02 August 2009Reply With Quote
One of Us
Picture of vapodog
posted Hide Post
quote:
Originally posted by kendog:
quote:
Originally posted by vapodog:
I have an M-1 Garand and the bore has been welded shut. I have a new barrel for it and am wanting someone to remove the old welded barrel and install the new one.

Does anyone out there want this job?


I can do it for you. I install short chambered barrels on M1's and M14's all the time. Is it just the bore plugged with weld, or is the barrel tacked to the receiver?

The chamber is welded shut and there is a very light tig on the barrel where it attaches to the receiver.

I have milled the tack away

I can send you the barreled acton fully stripped from the gun and the "new " barrel.

Do you need more than that.....and please PM me with the cost to attach the new barrel.


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
 
Posts: 28849 | Location: western Nebraska | Registered: 27 May 2003Reply With Quote
One of Us
Picture of dpcd
posted Hide Post
CMP custom shop charges $75.
 
Posts: 17364 | Location: USA | Registered: 02 August 2009Reply With Quote
new member
posted Hide Post
Dean's Gun Restorations, CMP, Fulton Armory, and Orion 7 all do tons of Garands
 
Posts: 5 | Registered: 27 August 2013Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by vapodog:
quote:
Originally posted by kendog:
quote:
Originally posted by vapodog:
I have an M-1 Garand and the bore has been welded shut. I have a new barrel for it and am wanting someone to remove the old welded barrel and install the new one.

Does anyone out there want this job?


I can do it for you. I install short chambered barrels on M1's and M14's all the time. Is it just the bore plugged with weld, or is the barrel tacked to the receiver?

The chamber is welded shut and there is a very light tig on the barrel where it attaches to the receiver.

I have milled the tack away

I can send you the barreled acton fully stripped from the gun and the "new " barrel.

Do you need more than that.....and please PM me with the cost to attach the new barrel.


PM Sent
 
Posts: 245 | Registered: 24 August 2008Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia