The Accurate Reloading Forums
Mod. 98 rifling depth??

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/808106031

25 April 2004, 07:34
bartsche
Mod. 98 rifling depth??
I have a mod. 98 with a bore dia. between .309" and .3098" as close as I can measure it and a grove dia. of .3238" to .324". Is the bore diameter a little small???? roger
25 April 2004, 10:45
bartsche
I've fired some turk ammo in it and it seems to be a little hot.
25 April 2004, 12:25
Tailgunner
Well, I've got a fine takeoff barrel with "strong rifling" (dealer speak for "you can see where the rifling used to be") in 8mm Mauser, that I'd let you have (even trade) for that poor worn out tube you have (see what a generous guy I am?).
The Turk ammo IS hot.
25 April 2004, 13:03
craigster
Yup, the Turk ammo seems a little hot alright. More like a lot hot!

Fired a bunch last weekendend in a 48 Yugo, bolt lift was a little sticky. I haven't chronoed any myself, but have heard that 3000fps with 150 gr bullets is common. Accuracy wasn't all that bad, 2"-3" five shots @ 100yd from an average barrel.