THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
exporting an action
 Login/Join
 
One of Us
posted
What paperwork would one need to fill out to send an action out of the country. There is an importer on the other end of the deal.
 
Posts: 7090 | Registered: 11 January 2005Reply With Quote
One of Us
Picture of Mike_Dettorre
posted Hide Post
You already have the paperwork. It's called a check.

Of course you need a computer and an internet connection to google Firearms Exporting Services

http://www.cherrys.com/exportservices.htm

http://www.johnsonfirearms.com/

http://www.simpsonltd.com/export.php

http://www.gunsinternational.c...cfm?gun_id=100038378

Then you write one of these people a check.


Mike

Never under estimate the internet community's ability to reply to your post with their personal rant about their tangentially related, single occurrence issue.



What I have learned on AR, since 2001:
1. The proper answer to: Where is the best place in town to get a steak dinner? is…You should go to Mel's Diner and get the fried chicken.
2. Big game animals can tell the difference between .015 of an inch in diameter, 15 grains of bullet weight, and 150 fps.
3. There is a difference in the performance of two identical projectiles launched at the same velocity if they came from different cartridges.
4. While a double rifle is the perfect DGR, every 375HH bolt gun needs to be modified to carry at least 5 down.
5. While a floor plate and detachable box magazine both use a mechanical latch, only the floor plate latch is reliable. Disregard the fact that every modern military rifle uses a detachable box magazine.
6. The Remington 700 is unreliable regardless of the fact it is the basis of the USMC M40 sniper rifle for 40+ years with no changes to the receiver or extractor and is the choice of more military and law enforcement sniper units than any other rifle.
7. PF actions are not suitable for a DGR and it is irrelevant that the M1, M14, M16, & AK47 which were designed for hunting men that can shoot back are all PF actions.
8. 95 deg F in Africa is different than 95 deg F in TX or CA and that is why you must worry about ammunition temperature in Africa (even though most safaris take place in winter) but not in TX or in CA.
9. The size of a ding in a gun's finish doesn't matter, what matters is whether it’s a safe ding or not.
10. 1 in a row is a trend, 2 in a row is statistically significant, and 3 in a row is an irrefutable fact.
11. Never buy a WSM or RCM cartridge for a safari rifle or your go to rifle in the USA because if they lose your ammo you can't find replacement ammo but don't worry 280 Rem, 338-06, 35 Whelen, and all Weatherby cartridges abound in Africa and back country stores.
12. A well hit animal can run 75 yds. in the open and suddenly drop with no initial blood trail, but the one I shot from 200 yds. away that ran 10 yds. and disappeared into a thicket and was not found was lost because the bullet penciled thru. I am 100% certain of this even though I have no physical evidence.
13. A 300 Win Mag is a 500 yard elk cartridge but a 308 Win is not a 300 yard elk cartridge even though the same bullet is travelling at the same velocity at those respective distances.
 
Posts: 10134 | Location: Loving retirement in Boise, ID | Registered: 16 December 2003Reply With Quote
One of Us
posted Hide Post
from what I can see, all these folks are doing is applying for an export permit. Why can't I apply for one myself?
 
Posts: 7090 | Registered: 11 January 2005Reply With Quote
One of Us
Picture of Michael Robinson
posted Hide Post
22WRF, you can do it yourself on the basis of a one-time exception to the usual exporter registration requirements (International Traffic in Arms Regulations, promulgated under the Arms Export Control Act).

This exception is available to every American citizen, but only on a one-time basis.

I have used it, and for anyone who knows his way around a government form (or two, or three, or ten Big Grin), it's not too tough.

It does take a bit of time, though.


Mike

Wilderness is my cathedral, and hunting is my prayer.
 
Posts: 13623 | Location: New England | Registered: 06 June 2003Reply With Quote
One of Us
posted Hide Post
You being an attorney you SHOULD have the answer.

Go to the state department website; they are in charge of exporting firarms, the ATFE handles the imports.


Jim Kobe
10841 Oxborough Ave So
Bloomington MN 55437
952.884.6031
Professional member American Custom Gunmakers Guild

 
Posts: 5521 | Location: Minnesota | Registered: 10 July 2002Reply With Quote
One of Us
posted Hide Post
Yea right, like every attorney knows every state and federal regulation for every area of the law.

Just as you wouldn't go to a foot surgeon to have your knee replaced, you wouldn't go to a GP attorney for firearms knowledge. I admit to knowing nothing about firearm laws.

Thank you everyone for pointing me in the correct direction.
 
Posts: 7090 | Registered: 11 January 2005Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia