THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
What Is The Name Of This Stockmaking Tool?
 Login/Join
 
one of us
Picture of Nitroman
posted
It has lots of little steel pins that slide independently of each other so you can press it on a stock leaving an impression of the profile. Using this you can check to see how close you are to what you want.

Need the name.

Thanks.
 
Posts: 1844 | Location: Southwest Alaska | Registered: 28 February 2001Reply With Quote
one of us
posted Hide Post
Contour gauge , I think thats it .
Get em at Lowes , Home Creepo, Most any

hardware store

flinter6 out
 
Posts: 46 | Location: Topeka, KS | Registered: 18 October 2002Reply With Quote
one of us
posted Hide Post
Lee Valley Tools sells it and it is found at Profile Gauge

Here's another: Profile gauge, stainless steel

Since they are mostly (?) used in tile work (ceramic, etc.) your local tile shop should have one.
 
Posts: 266 | Registered: 14 July 2002Reply With Quote
one of us
Picture of Nitroman
posted Hide Post
Thank you gentlemen.
 
Posts: 1844 | Location: Southwest Alaska | Registered: 28 February 2001Reply With Quote
Moderator
Picture of jeffeosso
posted Hide Post
what Sysephus , except you'll find them in the wood working area, especially in the crown molding area

jeffe
 
Posts: 40016 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia