THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Why does the Mauser bolt stop
 Login/Join
 
One of Us
posted
pivot screw have a pointy end on it?

I got ideas, but I gotz to know.
 
Posts: 3314 | Location: NYC | Registered: 18 April 2005Reply With Quote
One of Us
Picture of Mike_Dettorre
posted Hide Post
To match the pinheads of Mauser zealots Big Grin


Mike

Legistine actu quod scripsi?

Never under estimate the internet community's ability to reply to your post with their personal rant about their tangentially related, single occurrence issue.




What I have learned on AR, since 2001:
1. The proper answer to: Where is the best place in town to get a steak dinner? is…You should go to Mel's Diner and get the fried chicken.
2. Big game animals can tell the difference between .015 of an inch in diameter, 15 grains of bullet weight, and 150 fps.
3. There is a difference in the performance of two identical projectiles launched at the same velocity if they came from different cartridges.
4. While a double rifle is the perfect DGR, every 375HH bolt gun needs to be modified to carry at least 5 down.
5. While a floor plate and detachable box magazine both use a mechanical latch, only the floor plate latch is reliable. Disregard the fact that every modern military rifle uses a detachable box magazine.
6. The Remington 700 is unreliable regardless of the fact it is the basis of the USMC M40 sniper rifle for 40+ years with no changes to the receiver or extractor and is the choice of more military and law enforcement sniper units than any other rifle.
7. PF actions are not suitable for a DGR and it is irrelevant that the M1, M14, M16, & AK47 which were designed for hunting men that can shoot back are all PF actions.
8. 95 deg F in Africa is different than 95 deg F in TX or CA and that is why you must worry about ammunition temperature in Africa (even though most safaris take place in winter) but not in TX or in CA.
9. The size of a ding in a gun's finish doesn't matter, what matters is whether it’s a safe ding or not.
10. 1 in a row is a trend, 2 in a row is statistically significant, and 3 in a row is an irrefutable fact.
11. Never buy a WSM or RCM cartridge for a safari rifle or your go to rifle in the USA because if they lose your ammo you can't find replacement ammo but don't worry 280 Rem, 338-06, 35 Whelen, and all Weatherby cartridges abound in Africa and back country stores.
12. A well hit animal can run 75 yds. in the open and suddenly drop with no initial blood trail, but the one I shot from 200 yds. away that ran 10 yds. and disappeared into a thicket and was not found was lost because the bullet penciled thru. I am 100% certain of this even though I have no physical evidence.
13. A 300 Win Mag is a 500 yard elk cartridge but a 308 Win is not a 300 yard elk cartridge even though the same bullet is travelling at the same velocity at those respective distances.
 
Posts: 10169 | Location: Loving retirement in Boise, ID | Registered: 16 December 2003Reply With Quote
One of Us
posted Hide Post
It serves to center/locate the ejector during reassembly.
 
Posts: 8169 | Location: humboldt | Registered: 10 April 2002Reply With Quote
One of Us
posted Hide Post
And it alswo guarantees you will punture yourself with it when you are handling the actionj


Jim Kobe
10841 Oxborough Ave So
Bloomington MN 55437
952.884.6031
Professional member American Custom Gunmakers Guild

 
Posts: 5534 | Location: Minnesota | Registered: 10 July 2002Reply With Quote
One of Us
Picture of richj
posted Hide Post
You've discovered the 4th "recoil lug"
 
Posts: 6526 | Location: NY, NY | Registered: 28 November 2005Reply With Quote
One of Us
posted Hide Post
I'm bruised beyond recognition, but I'm still on my feet.

Wink
 
Posts: 3314 | Location: NYC | Registered: 18 April 2005Reply With Quote
one of us
posted Hide Post
quote:
Originally posted by richj:
You've discovered the 4th "recoil lug"



NOT TRUE. It actually gives it a better ballistic coeficient. stir
 
Posts: 323 | Location: Northeastern, PA | Registered: 21 June 2002Reply With Quote
One of Us
posted Hide Post
It can also be used to scratch your initials in the stock so you can easily ID your rifle should it be lost or stolen.
hilbily
 
Posts: 8169 | Location: humboldt | Registered: 10 April 2002Reply With Quote
One of Us
Picture of olcrip
posted Hide Post
quote:
Originally posted by Mike_Dettorre:
To match the pinheads of Mauser zealots Big Grin


Mike_D, spoken like a true Pin-head. Bill O'Riely would be proud of you. Of course we all know your a true pariot. stir


Olcrip,
Nuclear Grade UBC Ret.
NRA Life Member, December 2009

Politicians should wear Nascar Driver's jump suites so we can tell who their corporate sponsers are!
 
Posts: 1800 | Location: River City, USA. East of the Mississippi | Registered: 10 February 2004Reply With Quote
One of Us
Picture of Mike_Dettorre
posted Hide Post
"Mike_D, spoken like a true Pin-head. Bill O'Riely would be proud of you. Of course we all know your a true pariot. stir "


olcrip,

When attempting to dig/cut up a person regarding their intelligence or persona, always best to spell check.


Mike

Legistine actu quod scripsi?

Never under estimate the internet community's ability to reply to your post with their personal rant about their tangentially related, single occurrence issue.




What I have learned on AR, since 2001:
1. The proper answer to: Where is the best place in town to get a steak dinner? is…You should go to Mel's Diner and get the fried chicken.
2. Big game animals can tell the difference between .015 of an inch in diameter, 15 grains of bullet weight, and 150 fps.
3. There is a difference in the performance of two identical projectiles launched at the same velocity if they came from different cartridges.
4. While a double rifle is the perfect DGR, every 375HH bolt gun needs to be modified to carry at least 5 down.
5. While a floor plate and detachable box magazine both use a mechanical latch, only the floor plate latch is reliable. Disregard the fact that every modern military rifle uses a detachable box magazine.
6. The Remington 700 is unreliable regardless of the fact it is the basis of the USMC M40 sniper rifle for 40+ years with no changes to the receiver or extractor and is the choice of more military and law enforcement sniper units than any other rifle.
7. PF actions are not suitable for a DGR and it is irrelevant that the M1, M14, M16, & AK47 which were designed for hunting men that can shoot back are all PF actions.
8. 95 deg F in Africa is different than 95 deg F in TX or CA and that is why you must worry about ammunition temperature in Africa (even though most safaris take place in winter) but not in TX or in CA.
9. The size of a ding in a gun's finish doesn't matter, what matters is whether it’s a safe ding or not.
10. 1 in a row is a trend, 2 in a row is statistically significant, and 3 in a row is an irrefutable fact.
11. Never buy a WSM or RCM cartridge for a safari rifle or your go to rifle in the USA because if they lose your ammo you can't find replacement ammo but don't worry 280 Rem, 338-06, 35 Whelen, and all Weatherby cartridges abound in Africa and back country stores.
12. A well hit animal can run 75 yds. in the open and suddenly drop with no initial blood trail, but the one I shot from 200 yds. away that ran 10 yds. and disappeared into a thicket and was not found was lost because the bullet penciled thru. I am 100% certain of this even though I have no physical evidence.
13. A 300 Win Mag is a 500 yard elk cartridge but a 308 Win is not a 300 yard elk cartridge even though the same bullet is travelling at the same velocity at those respective distances.
 
Posts: 10169 | Location: Loving retirement in Boise, ID | Registered: 16 December 2003Reply With Quote
One of Us
Picture of Tapper2
posted Hide Post
quote:
Originally posted by tin can:
pivot screw have a pointy end on it?

I got ideas, but I gotz to know.


Try and reassemble it without it.


SCI lifer
NRA Patron
DRSS
DSC
 
Posts: 654 | Location: Denver, Iowa | Registered: 10 June 2009Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by Mike_Dettorre:
"Mike_D, spoken like a true Pin-head. Bill O'Riely would be proud of you. Of course we all know your a true pariot. stir "


olcrip,

When attempting to dig/cut up a person regarding their intelligence or persona, always best to spell check.

Good catch, Mike.

Stephen
 
Posts: 538 | Location: Pacific Northwet | Registered: 14 August 2010Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by Tapper2:
quote:
Originally posted by tin can:
pivot screw have a pointy end on it?

I got ideas, but I gotz to know.


Try and reassemble it without it.


That wouldn't be reassembling it.

(edited)

oops- got it.
 
Posts: 3314 | Location: NYC | Registered: 18 April 2005Reply With Quote
One of Us
Picture of olcrip
posted Hide Post
quote:
Originally posted by Mike_Dettorre:
"Mike_D, spoken like a true Pin-head. Bill O'Riely would be proud of you. Of course we all know your a true pariot. stir "


olcrip,

When attempting to dig/cut up a person regarding their intelligence or persona, always best to spell check.


Mike_D, I stand corrected and humbled. I still think your a true Patriot. salute

"Mike_D, spoken like a true Pin-head. Bill O'Reilly would be proud of you. Of course we all know your a true patriot." patriot


Olcrip,
Nuclear Grade UBC Ret.
NRA Life Member, December 2009

Politicians should wear Nascar Driver's jump suites so we can tell who their corporate sponsers are!
 
Posts: 1800 | Location: River City, USA. East of the Mississippi | Registered: 10 February 2004Reply With Quote
one of us
posted Hide Post
quote:
Originally posted by tin can:
pivot screw have a pointy end on it?

I got ideas, but I gotz to know.


Since the screw must be inserted with the ejector box under spring pressure, it allows the screw to be centered before the threads engage. This keeps the threads from getting buggered.
 
Posts: 2036 | Location: Roebling, NJ 08554 | Registered: 20 January 2002Reply With Quote
One of Us
posted Hide Post
It's there to remind you that Mr. Mauser was right in the first place, there is reason for every little nouance.
 
Posts: 235 | Registered: 08 April 2007Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia