THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Ruger No. 1 part needed. HELP!
 Login/Join
 
One of Us
posted
As you may know Ruger will not sell parts to almost anyone. "Send the gun in" is the packaged answer. They can't seem to understand that they never made a Ruger No.1 African in 450 Nitro #2 3.5" !
The ejector (gunsmith modified from a 458 WinMag) is not working 100%.
Wondering (hoping) if anyone has one from a 45-70, 470 Nitro, 450-400 or 9.3x74 I could purchase ?
Thanks for your assistance.
 
Posts: 219 | Registered: 28 January 2013Reply With Quote
one of us
Picture of fireball168
posted Hide Post
In stock:

http://www.gunpartscorp.com/Products/231660B.htm

Backordered at Brownells:

780-001-158WB
Ejector
Mfr Part: SC126
RUGER
 
Posts: 1332 | Location: IN | Registered: 30 April 2004Reply With Quote
one of us
Picture of z1r
posted Hide Post
About the only part Ruger hasn't sold me was a barrel. Otherwise, they have sold me everything I've requested.




Aut vincere aut mori
 
Posts: 4869 | Location: Lakewood, CO | Registered: 07 February 2002Reply With Quote
One of Us
Picture of dpcd
posted Hide Post
I, too, have bought most every part from Ruger directly and I think they sell ejectors. Stocks, however, they will not sell. Have to send the rifle in. I explained that I have fit hundreds of stocks and I will take all responsibility. NO. Send it in. Which I did.
 
Posts: 17442 | Location: USA | Registered: 02 August 2009Reply With Quote
One of Us
posted Hide Post
Well perhaps but the people I spoke with at Ruger YESTERDAY said no way Jose.

As of Tuesday GunParts had NO Ruger ejectors and the tech at Brownells said they don't even stock them.

So, I'm still looking. Thanks.
 
Posts: 219 | Registered: 28 January 2013Reply With Quote
One of Us
posted Hide Post
I would think that extractor could be made to work; something is hanging up.


Jim Kobe
10841 Oxborough Ave So
Bloomington MN 55437
952.884.6031
Professional member American Custom Gunmakers Guild

 
Posts: 5534 | Location: Minnesota | Registered: 10 July 2002Reply With Quote
One of Us
posted Hide Post
artshaw = 45-70 Shooter = Larry Root. donttroll
 
Posts: 8169 | Location: humboldt | Registered: 10 April 2002Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by artshaw:
As you may know Ruger will not sell parts to almost anyone. "Send the gun in" is the packaged answer. They can't seem to understand that they never made a Ruger No.1 African in 450 Nitro #2 3.5" !
The ejector (gunsmith modified from a 458 WinMag) is not working 100%.
Wondering (hoping) if anyone has one from a 45-70, 470 Nitro, 450-400 or 9.3x74 I could purchase ?
Thanks for your assistance.

Hey Larry Root'

You posted on the big bore forum you only had one #1, a red pad .375. Now you've also got one in 450 Nitro #2 3.5" ? You are so dense you can't even remember where you were or to whom you lied to last. Pathetic
 
Posts: 8169 | Location: humboldt | Registered: 10 April 2002Reply With Quote
One of Us
posted Hide Post
No, my friend (name unknown) I said I only had one 375 H&H (that was the thread's topic, not Ruger No. 1s.)

Neither a liar or pathetic ..... at least you got my name right ..... too bad you and the other stalkers are too cowardly to man up and reveal yours' and in such a hurry to slander others you can't even get the thread's subject correct.

As for No 1/3s, I have a few: 22-250, 7x57, 30-40 Krag, 300 H&H, 35 Whelen and the 450 Nitro #2. 3.5".

Stop by Pinedale next summer and you can see them all. I may even take you up to the range if you can be civil.

Now, if you can help with the part, I'd love to hear from you ..... otherwise stop being a troll.
 
Posts: 219 | Registered: 28 January 2013Reply With Quote
One of Us
posted Hide Post
donttroll


The only easy day is yesterday!
 
Posts: 2758 | Location: Northern Minnesota | Registered: 22 September 2005Reply With Quote
One of Us
posted Hide Post
Yep, I got your name right, not at all hard to figure out. You really should use your real name Larry, we all know who/what you are. Care to share with us why you show up with a different screen name every other month posting like you actually know what you're talking about.
I almost (but not quite) feel sorry for you.
 
Posts: 8169 | Location: humboldt | Registered: 10 April 2002Reply With Quote
One of Us
posted Hide Post
Good news. I went back to Numrich after failing the first time and was able order a 416 Rigby ejector, spring and plunger.
I hope that with a bit more care than the reuse of the 458 ejector, it will correct the problem.

For all who provided advice and suggestions, thanks very much !
 
Posts: 219 | Registered: 28 January 2013Reply With Quote
One of Us
posted Hide Post
Who cares what you do?


The only easy day is yesterday!
 
Posts: 2758 | Location: Northern Minnesota | Registered: 22 September 2005Reply With Quote
One of Us
posted Hide Post
Gee Larry, thanks for sharing with us. I'm so happy for you.

And thanks so much for the PM. Keep 'em coming, your drivel is very entertaining.
 
Posts: 8169 | Location: humboldt | Registered: 10 April 2002Reply With Quote
One of Us
posted Hide Post
Just received notice that parts have shipped.
I'm sure fitting it will be an interesting task
but failing that it's off to a family member who owns a CAD milling machine.
Wish me luck !
 
Posts: 219 | Registered: 28 January 2013Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia