THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Rolling block threads
 Login/Join
 
Scota4570
One of Us
posted
#1 1/2 7mm South American carbine. The rotary extractor type. The Drawing is in the NRA Gunsithing Guide, which I don't have right now.

Can anyone post a scan of it, or another accurate drawing of the barrel shank?

I don't have the old barrel to copy. Should be a fun build, 45 ACP. Smiler

Thanks in advance.

Scot
 
Posts: 508 | Registered: 20 January 2005Reply With Quote
dpcd
One of Us
Picture of dpcd
posted Hide Post
You probably have a 1902 roller if it was a South american 7mm; the 1 1/2s were sporting rifles with octagon tops. But you might.
I will get you the threads later; I have both the book and the barrels.
 
Posts: 17385 | Location: USA | Registered: 02 August 2009Reply With Quote
Scota4570
One of Us
posted Hide Post
You are right, my bad. It is a #5. I made a trial barrel stub out of bar stock and figured it out.

Thanks, problem solved.

Scot
 
Posts: 508 | Registered: 20 January 2005Reply With Quote
craigster
One of Us
posted Hide Post
quote:
Originally posted by Scota4570:
#1 1/2 7mm South American carbine. The rotary extractor type. The Drawing is in the NRA Gunsithing Guide, which I don't have right now.

Can anyone post a scan of it, or another accurate drawing of the barrel shank?

I don't have the old barrel to copy. Should be a fun build, 45 ACP. Smiler

Thanks in advance.

Scot


Indeed it should. Keep us updated.
 
Posts: 8169 | Location: humboldt | Registered: 10 April 2002Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia