The Accurate Reloading Forums
Adjusting Rem 700 Trigger

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/791102089

04 December 2008, 13:17
gumboot458
Adjusting Rem 700 Trigger
Any one know how to adjust these new triggers with the smooth shoe or trigger face ??????


.If it can,t be grown , its gotta be mined ....
04 December 2008, 13:19
Masterifleman
Query Tip Burns. I saw him adjust one today but didn't pay enough attention to tell you how. He wasn't able to get it under 3 1/2 lbs.


"I ask, sir, what is the Militia? It is the whole people. To disarm the people is the best and most effective way to enslave them" - George Mason, co-author of the Second Amendment during the Virginia convention to ratify the Constitution
04 December 2008, 17:02
eddieharren
They adjust just like the old ones. There is a ton of info on this over on www.snipershide.com
04 December 2008, 20:01
srtrax
This may be the same sight as above, but I found this one some time ago. I like my hunting triggers in pounds NOT ounces! Around 3 pounds is as low as I'll go on a customers hunting rifle and that is where I like mine also.
http://www.snipercountry.com/Articles/RemingtonTriggers.asp


_____________________
Steve Traxson

04 December 2008, 21:13
Andre Mertens
This says it all regarding the new Remington X-Mark Pro Trigger :

http://www.24hourcampfire.com/ubbthreads/ubbthreads.php...6/page/3#Post2559476

http://www.24hourcampfire.com/ubbthreads/ubbthreads.php...9/page/2#Post2185569


André
DRSS
---------

3 shots do not make a group, they show a point of aim or impact.
5 shots are a group.
04 December 2008, 21:30
gumboot458
Wow , Thanks for the replies all ...... This one is a fur rifle so it needs to be nice and light , ,,2 lbs or less .......... As long as it is 100 % safe 1 lb is great ...Sure does make hitting running animals alot easier ........ I hope I don,t have to put an aftermarket trigger in this ....... I,m sure wishing I had got a Ruger 77 mk II VT so far ............


.If it can,t be grown , its gotta be mined ....
05 December 2008, 01:25
gumboot458
Andre ;;;; Thanks for the link .... As I,m a Ruger and CZ guy .I didn,t know which screw did what and had to read the post a few times .... .. These triggers are very good but the factory pull weight was comparable to the weight of the barreled action ...... I like the engagement ect but the weight was unbearable ......I hope it keeps the weight adjustment I set it at ... Thanks again ..


.If it can,t be grown , its gotta be mined ....