THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
1/4 x 22 TAP
 Login/Join
 
One of Us
posted
Roger Vardy asked me to look up a source for a Mauser guard screw tap 1/4" x 22TPI Surprise! seems to be in short supply. Found one source @ 24.00....Maybe I missed it, but does Brownells no longer carry?
 
Posts: 3675 | Location: Phone: (253) 535-0066 / (253) 230-5599, Address: PO Box 822 Spanaway WA 98387 | www.customgunandrifle.com | Registered: 16 April 2013Reply With Quote
One of Us
Picture of dpcd
posted Hide Post
I got mine from Brownells but it seems they no longer carry them.
 
Posts: 17443 | Location: USA | Registered: 02 August 2009Reply With Quote
one of us
posted Hide Post
Brownell's website search engine has to be the WORST on the planet.

Try these numbers, and they are in stock.

748-101-422, 3 flute perfect cut

748-001-422 HSS 2 flute

JW
 
Posts: 1497 | Location: Chehalis, Washington | Registered: 02 April 2003Reply With Quote
One of Us
posted Hide Post
Many thanks Jim...seems the new, young, aggressive, super intelligent leadership. at Brownells steps up to the plate if you need only 1911 and AR shit!


Tried every search possibility my old, but logical brain could think of...really appreciate it!
 
Posts: 3675 | Location: Phone: (253) 535-0066 / (253) 230-5599, Address: PO Box 822 Spanaway WA 98387 | www.customgunandrifle.com | Registered: 16 April 2013Reply With Quote
One of Us
Picture of custombolt
posted Hide Post
This one was at the bottom of the list, almost missed it. Thanks for the numbers Jim.

CB
quote:
748-101-422, 3 flute perfect cut


Life itself is a gift. Live it up if you can.
 
Posts: 5310 | Location: Near Hershey PA | Registered: 12 October 2012Reply With Quote
one of us
posted Hide Post
1911 parts HA HA

Went to order some Wilson Combat mainspring housings, and magazine latches, OUT - NO - BACKORDER
As well as several other 1911 parts, this was last week.

Good thing I have a long list of needed parts, and go thru it every month, one of these days I will get all the parts I need.

J Wisner
 
Posts: 1497 | Location: Chehalis, Washington | Registered: 02 April 2003Reply With Quote
One of Us
Picture of dpcd
posted Hide Post
Here is the problem: I searched for 1/4x22. It is listed as 1/4-22.
And yes, their search engine is atrocious; and I have told them so; obviously without any change.
Bastards.
 
Posts: 17443 | Location: USA | Registered: 02 August 2009Reply With Quote
One of Us
posted Hide Post
Tom
Why would they pay any attention to you, you are just a customer. Frowner


Never rode a bull, but have shot some.

NRA life member
NRA LEO firearms instructor (retired)
NRA Golden Eagles member
 
Posts: 1514 | Location: Camp Verde, AZ | Registered: 13 December 2005Reply With Quote
One of Us
Picture of Mike_Dettorre
posted Hide Post
Brownell's search enginge has been atrocious from Day 1 of their website and Day 1 of their improved website.

What is literally unbelievable is that an effective website search engine for a company that sells tens of thousands of items over the internet is the most basic requirment.


Mike

Legistine actu quod scripsi?

Never under estimate the internet community's ability to reply to your post with their personal rant about their tangentially related, single occurrence issue.




What I have learned on AR, since 2001:
1. The proper answer to: Where is the best place in town to get a steak dinner? is…You should go to Mel's Diner and get the fried chicken.
2. Big game animals can tell the difference between .015 of an inch in diameter, 15 grains of bullet weight, and 150 fps.
3. There is a difference in the performance of two identical projectiles launched at the same velocity if they came from different cartridges.
4. While a double rifle is the perfect DGR, every 375HH bolt gun needs to be modified to carry at least 5 down.
5. While a floor plate and detachable box magazine both use a mechanical latch, only the floor plate latch is reliable. Disregard the fact that every modern military rifle uses a detachable box magazine.
6. The Remington 700 is unreliable regardless of the fact it is the basis of the USMC M40 sniper rifle for 40+ years with no changes to the receiver or extractor and is the choice of more military and law enforcement sniper units than any other rifle.
7. PF actions are not suitable for a DGR and it is irrelevant that the M1, M14, M16, & AK47 which were designed for hunting men that can shoot back are all PF actions.
8. 95 deg F in Africa is different than 95 deg F in TX or CA and that is why you must worry about ammunition temperature in Africa (even though most safaris take place in winter) but not in TX or in CA.
9. The size of a ding in a gun's finish doesn't matter, what matters is whether it’s a safe ding or not.
10. 1 in a row is a trend, 2 in a row is statistically significant, and 3 in a row is an irrefutable fact.
11. Never buy a WSM or RCM cartridge for a safari rifle or your go to rifle in the USA because if they lose your ammo you can't find replacement ammo but don't worry 280 Rem, 338-06, 35 Whelen, and all Weatherby cartridges abound in Africa and back country stores.
12. A well hit animal can run 75 yds. in the open and suddenly drop with no initial blood trail, but the one I shot from 200 yds. away that ran 10 yds. and disappeared into a thicket and was not found was lost because the bullet penciled thru. I am 100% certain of this even though I have no physical evidence.
13. A 300 Win Mag is a 500 yard elk cartridge but a 308 Win is not a 300 yard elk cartridge even though the same bullet is travelling at the same velocity at those respective distances.
 
Posts: 10181 | Location: Loving retirement in Boise, ID | Registered: 16 December 2003Reply With Quote
One of Us
Picture of dpcd
posted Hide Post
There is an easy, 20th century solution and one which they continue to support; they send me a 4 pound glossy paper catalog each year. By US Mail. I forget to use it though.
 
Posts: 17443 | Location: USA | Registered: 02 August 2009Reply With Quote
one of us
Picture of D Humbarger
posted Hide Post
Check MSC.



Doug Humbarger
NRA Life member
Tonkin Gulf Yacht Club 72'73.
Yankee Station

Try to look unimportant. Your enemy might be low on ammo.
 
Posts: 8351 | Location: Jennings Louisiana, Arkansas by way of Alabama by way of South Carloina by way of County Antrim Irland by way of Lanarkshire Scotland. | Registered: 02 November 2001Reply With Quote
One of Us
Picture of gunmaker
posted Hide Post
Never ordered from them, just searched for the tap.

https://www.msdiscounttool.com...KHez6bkaAurKEALw_wcB


gunmaker
------------------
James Anderson Metalsmith & Stockmaker
WEB SITE

More Pics on FLICKR
 
Posts: 1864 | Location: Western South Dakota | Registered: 05 January 2005Reply With Quote
One of Us
Picture of gunmaker
posted Hide Post
suncoast and ebay are the only businesses I've purchased from. other stuff not the taps

ebay
travers
suncutting
suncoast


gunmaker
------------------
James Anderson Metalsmith & Stockmaker
WEB SITE

More Pics on FLICKR
 
Posts: 1864 | Location: Western South Dakota | Registered: 05 January 2005Reply With Quote
one of us
posted Hide Post
quote:
Originally posted by dpcd:
There is an easy, 20th century solution and one which they continue to support; they send me a 4 pound glossy paper catalog each year. By US Mail. I forget to use it though.


Unfortunately Digikey quit making paper catalogs. I treasure their last one...


TomP

Our country, right or wrong. When right, to be kept right, when wrong to be put right.

Carl Schurz (1829 - 1906)
 
Posts: 14816 | Location: Moreno Valley CA USA | Registered: 20 November 2000Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia