The Accurate Reloading Forums THE ACCURATE RELOADING.COM FORUMS Guns, Politics, Gunsmithing & Reloading Gunsmithing Converting a 30-06 to 7mm rem MagGo | New | Find | Notify | Tools | Reply | |
| Converting a 30-06 to 7mm rem Mag | Login/Join |
| One of Us |
How big of a deal is it to have a 30-06 converted over to a 7mm Rem Magnum? I have a Tikka M65 (Or Ithaca LSA 65) in 30-06. I believe I can get a magnum bolt, floorplate and magazine for this gun. Aside from rechambering the barrel, is there anything else I would need to do? What would I expect to pay for this conversion (roughly)? | ||
|
One of Us |
Frankly, it's less costly to trade guns than to convert them especially when you have to install a new barrel. /////////////////////////////////////////////////////////////////////////// "Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery." Winston Churchill | |||
|
One of Us |
 Josywales, you can't just rechamber an 06 to 7mm. if you have all the other things you mentioned then you should go with 300Win. mag. It would save you the cost of a barrel if not changing calibers.  Olcrip, Nuclear Grade UBC Ret. NRA Life Member, December 2009 Politicians should wear Nascar Driver's jump suites so we can tell who their corporate sponsers are! | |||
|
| One of Us |
Josy, Rebarrel, open the bolt face, buy a different magazine box and possible rework the feed rails (not sure if these feed off the magazine box or the action geometry). Cheaper to buy a gun in that caliber than what you contemplate. | |||
|
| one of us |
Josywales Think about it. Going from 30-06 to 7MM Mag you gain very little,if any thing. Do the Math. Look at the 30-06 with the Federal Hgh Energy loads. Even steping up to the 300 Win Mag is not that great a deal. And I say this with the 300 Mag being one of my favorite cartridges. Much better IMHO if you need more than the 30-06 HE loads, is to go to a 338 Mag or a 375 H&H. I recommend you either keep the 30-06 aned get a "bigger" gun, or trade it for a "bigger" gun. Of course if you had a Blaser R 93 you could just get a new barrel [and magnum bolt head].  DOUBLE RIFLE SHOOTERS SOCIETY | |||
|
| One of Us |
superb advice. /////////////////////////////////////////////////////////////////////////// "Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery." Winston Churchill | |||
|
| one of us |
I would second that advice,,,excluding the part about the Blaser however. | |||
|
| Powered by Social Strata |
 | Please Wait. Your request is being processed... |
|
The Accurate Reloading Forums THE ACCURATE RELOADING.COM FORUMS Guns, Politics, Gunsmithing & Reloading Gunsmithing Converting a 30-06 to 7mm rem Mag
Visit our on-line store for AR Memorabilia