The Accurate Reloading Forums
Bedding a rifle action...

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/7801026231

14 May 2010, 01:04
Brando
Bedding a rifle action...
Im about to have another one of my rifles bedded at the local smith. He recently done my 308 with a glass bed job and it seemed to work really well.

But for this next bed job, pretty well will not cut it. So would I see better results out of aluminum block style bed job? Or should I consider another form?

Rifle is a 7mm Mag Sendero 700, and the bed job is my last piece of work before I make this rifle stretch its legs.
14 May 2010, 03:13
Westpac
If he done good with the .308 then he should know what's best for the Sendero. The Sendero usually comes with the HS Precision stock which would have the aluminum bedding block installed already. He can simply bed the action to this.


_______________________________________________________________________________
This is my rifle, there are many like it but this one is mine. My rifle is my best friend, it is my life.
14 May 2010, 11:03
Brando
10-4, That is what I was thinking but wasnt for sure on my thought process.