I have a stock that calls for a Niedner plate. The plate I got (from Sunny hill) is about 15% undersized. Do these/did these come in different sizes? Where can I get a large, or something interchangeable?

SDH had and oversize for sale about a month ago. Might check with him and see if it sold.

Need about 5 1/2" or 5 9/16" with the spur, doesn't have to be Niedner. SDH plate was 5/ 1/4" tall and it looks like he sold it on Ebay.

Contact Glenn Fewless. Mook Machinery Works.

gfewless@tds.net
262-534-5154 after 2PM CST

Just found 2 castings from Galazan of pointed solid buttplate in my box of toys. 5.437" x 1.882" x .107" thick

Sold at ebay auction for $265.

I might have one, new old stock that has been waiting for me to put on a rifle.
I'll look tomorrow and let you know.

Need 5.5" Dennis, or I will have to take off a LOT of wood and refinish. Kinda pointy at the toe is good, not blunt like Win 70.

I have one of Glenn Fewless's checkered steel buttplates, If you send me and email I can offer you the dimensions. Jkob60@msn.com

I suggested Glenn because he has the ability to make a "special" plate for you. I know he has the plates programmed into the CNC computer. Not sure just how much the extra length will cause the other dimensions to need tweeking too.

quote:

Originally posted by Dennis Earl Smith:
Contact Glenn Fewless. Mook Machinery Works.

gfewless@tds.net
262-534-5154 after 2PM CST

Dennis,

Do you have any other contact information from Glenn Fewless?

I emailed the address you posted and received no reply, and called the number provided and received no answer.

Sorry Nate, that is my latest information as of Jan 2020. Got it off his business card I picked up at DSC.

Will try again in a few days.

Thank you for posting the information.

I was considering making buttplates, but would rather purchase ready available ones!

Pricy but very nice quality.
https://riflemax.com/

Russ,
I finally found this buttplate that I mentioned if you are still looking for one. This one goes 5 5/16 with the spur and is 1 1/8" wide.

Neidner butt plates as sold by Brownell come in one size, but there are many Neidner type steel butt plates for sale out there, many that are a better product than Neidner..

At one point Duane Wiebe was making a nice checkered buttplate. I never got around to ordering one. Unfortunately, he sold the CNC business to someone else that has never responded to any e-mails I have sent.

Frustrating.

Brownells and Track of the wolf.