One of Us
| Many of the custom makers will contour their blank to match (closely) your barrel. Just call and ask....many of their websites say they do it for a small extra charge.
///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
|
| | | Posts: 28849 | Location: western Nebraska | Registered: 27 May 2003 | 
IP
|
|
One of Us
| PAC-NOR (http://www.pac-nor.com/contours/) comes to mind immediately. They produce a very good barrel (I have three and they all shoot well) and, for $35 will exactly produce your current contour. They will also be able to thread and deep chamber your barrel to to either caliber. All you will need to do is trim the chamber end to the proper headspace and screw it on. By the way, their exterior finish is second to none.
"I ask, sir, what is the Militia? It is the whole people. To disarm the people is the best and most effective way to enslave them" - George Mason, co-author of the Second Amendment during the Virginia convention to ratify the Constitution
|
| | | Posts: 1699 | Location: San Antonio, TX | Registered: 14 April 2004 |
IP
|
|
One of Us
| I’ve had Kreiger duplicate two barrel contours for me and they are about as perfect as you can get. |
| | | Posts: 466 | Location: South West USA | Registered: 11 December 2006 |
IP
|
|
One of Us
| I agree with Masterrifleman, Pacnor is great on contours, and they finish barrels very well. |
| | |
One of Us
| Thanks guys I will pick a barrel maker & talk to them directly. |
| | | Posts: 527 | Location: Tennessee U.S.A. | Registered: 14 April 2005 |
IP
|
|
