THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Bolt Handle Welding--Mauser VZ
 Login/Join
 
one of us
posted
Would appreciate advice on a good welder/gunssmith who can TIG weld (2) Talley handles on properly prepared VZ-24 Mauser bolts That means surfaces on both the stub and handle properly ground and ready to jg up and weld. Weld can be left rough for final contouring and finish. Jack Belk used to do this for me at a very reasonable price. Any suggestions appreciated.

Thanks in advance. Randy
 
Posts: 237 | Location: Montana | Registered: 22 February 2003Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by 10at6:
Would appreciate advice on a good welder/gunssmith who can TIG weld (2) Talley handles on properly prepared VZ-24 Mauser bolts That means surfaces on both the stub and handle properly ground and ready to jg up and weld. Weld can be left rough for final contouring and finish. Jack Belk used to do this for me at a very reasonable price. Any suggestions appreciated.

Thanks in advance. Randy


Drop a PM to z1r on here.
 
Posts: 4574 | Location: Valencia, California | Registered: 16 March 2005Reply With Quote
One of Us
posted Hide Post
Check with Vapodog on who did his.


Jim Kobe
10841 Oxborough Ave So
Bloomington MN 55437
952.884.6031
Professional member American Custom Gunmakers Guild

 
Posts: 5531 | Location: Minnesota | Registered: 10 July 2002Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia