The Accurate Reloading Forums
Browing Trigger ? inproving it

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/743104674

07 May 2006, 08:35
obwhan
Browing Trigger ? inproving it
What is the best way to improve the trigger pull and lighten the pull on a browing A bolt


NRA BENEFACTOR MEMBER: USNR (ADCS/AW/SW) I have wonderer at times what the TEN COMMAMDMENT'S would look like if Moses had run them through the US congress
07 May 2006, 13:18
malm
quote:
Originally posted by obwhan:
What is the best way to improve the trigger pull and lighten the pull on a browing A bolt


Well, you could find a gunsmith who is familiar with these triggers and have it done. For instance, I charge $40.00 plus shipping. Big Grin
07 May 2006, 18:47
jeffeosso
Not to take money from Malm's pocket.

midway has replacement triggers for the about onsale for 15 or 17 bucks

jeffe


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
08 May 2006, 01:10
Jon
Jeffeosse...
is this a complete trigger or just a single spring? I can't find it in Midway's catelog. I've replaced the "weight of pull" spring in my A bolt with no improvement whatsoever. It still grinds, creeps, and lets-off at about 10 lbs.
$40.00 + shipping for a good trigger sounds like a deal to me. I'll probably take Malm up on his offer.
Jon
08 May 2006, 07:13
obwhan
WOW $113.00 For a trigger seams kinda steep and only foumd one in the Midway cat.


NRA BENEFACTOR MEMBER: USNR (ADCS/AW/SW) I have wonderer at times what the TEN COMMAMDMENT'S would look like if Moses had run them through the US congress
08 May 2006, 08:22
ted thorn
Clip a small amount of the spring off with sharp side cutters then test for pull. If to much pull clip off a verry small amount more. Go slowly clip small amounts at a time. This works for A-Bolts good.


________________________________________________
Maker of The Frankenstud Sling Keeper
Proudly made in the USA
Acepting all forms of payment