THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
cocking piece frozen on pin ------
 Login/Join
 
one of us
posted
I have an old 700 apart and the cocking piece is frozen on the firing pin. Want to change the spring..Don't really want to heat it and alter the hardness of the cocking piece.. Any advice on how to break it loose... Yeah, I've already drifted the cross pin out...
Thanks,
Pat
 
Posts: 196 | Registered: 30 November 2002Reply With Quote
one of us
posted Hide Post
Clamp the firing pin in soft or padded vise jaws. The wrap a piece of soft aluminum or brass strip around the cocking piece and twist it. It should release when you break the burrs surrounding the cross pin hole.
 
Posts: 9207 | Registered: 22 November 2002Reply With Quote
one of us
posted Hide Post
Thanks, EDG... I'll give it a twist in the morning..

Should have thought of that anyway, geezing it, I guess.

I'm in Tx too also, mid coast, about 50 miles inland
 
Posts: 196 | Registered: 30 November 2002Reply With Quote
one of us
posted Hide Post
This is more common than you think. If you cant twist it loose you may have to tap it off with a brass or lead hammer. In either case don't be standing in line with it when it lets go. Or don't have it pointing at a window or your wife's favorite cat.
 
Posts: 1560 | Location: Arizona Mountains | Registered: 11 October 2004Reply With Quote
one of us
posted Hide Post
Man, I whipped on it something fierce with a plastic mallet!
Wouldn't budge... Tough nut to crack !!!!

The cat can fend for itself ........
 
Posts: 196 | Registered: 30 November 2002Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia