THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Painting/Finishing Silver scope rings
 Login/Join
 
One of Us
posted
I am thinking of finishing a stainless barrel and receiver with Brownell's ALuma-Hyde.

After the first rings rusted, I but a set of Warne Silver Finish rings and bases on the rifle. I presume this is electroless nickel.

I would like to paint/finish it similarly for asthetic reasons.

Has anyone doe this? Will paint adhere? Did you roughen it first?
 
Posts: 151 | Registered: 22 July 2005Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by metalman29:
I am thinking of finishing a stainless barrel and receiver with Brownell's ALuma-Hyde.

After the first rings rusted, I but a set of Warne Silver Finish rings and bases on the rifle. I presume this is electroless nickel.

I would like to paint/finish it similarly for asthetic reasons.

Has anyone doe this? Will paint adhere? Did you roughen it first?


I would call Brownell’s and ask them. Warne also makes two different types of Silver rings. One is nickel plated CM steel (MAXIMA), the other is a sintered alloy material (MAXIMA TPA). That might not make any difference, but you might need to tell them which type you have, the CM steel ones have the levers and the others don’t.
 
Posts: 4574 | Location: Valencia, California | Registered: 16 March 2005Reply With Quote
Moderator

Picture of Mark
posted Hide Post
Do you still have the old rings laying in a drawer somewhere?


for every hour in front of the computer you should have 3 hours outside
 
Posts: 7776 | Location: Between 2 rivers, Middle USA | Registered: 19 August 2000Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by Mark:
Do you still have the old rings laying in a drawer somewhere?


I believe I tossed them.
 
Posts: 151 | Registered: 22 July 2005Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia