THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Bedding a #1 ??
 Login/Join
 
One of Us
posted
Looks like I'm going to bed one of these darlings. It's suffering, poor grouping.

I recall seeing some info on bedding the forearms of these rifles but don't remember any details. Any other information on how to tweak a #1 for accuracy would be appreciated.

thanks,
Pat
 
Posts: 136 | Registered: 07 February 2005Reply With Quote
one of us
posted Hide Post
Pat,

Have a look here:
http://members.tripod.com/Rbertalotto/ruger/ruger.html

Best wishes for 2006
Carl


Exercise makes you look good naked, so does bourbon.....You decide
 
Posts: 189 | Location: Was Kansas, USA - Now South Australia | Registered: 03 March 2002Reply With Quote
new member
posted Hide Post
Pat

Check out Arthur Brown Company. http://www.eabco.com They specialize in making Ruger #1's more accurate. I had them build one for me from a barreled action. It shoots awsome. They free float the forearm and put in a new barrel and trigger. The shape of the new barrels gets rid of any stress from the scope mounts. They have a 0 stress barrel seating process. I have 2 Ruger #1 and I am going to send the stock one in to be done as well. Check out all of the information their web site.
 
Posts: 21 | Location: Northern Minnesota | Registered: 18 October 2005Reply With Quote
One of Us
posted Hide Post
its not a hard job and has been detailed several times over. Just relieve the pressure on the barrel channel and glas bed off the hanger.
 
Posts: 13465 | Location: faribault mn | Registered: 16 November 2004Reply With Quote
One of Us
posted Hide Post
Thanks, fellas... It all looks very straight forward.

I'll get on with the project !!

Pat
 
Posts: 136 | Registered: 07 February 2005Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia