THE ACCURATERELOADING.COM GUNSMITHING FORUM

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Guns, Politics, Gunsmithing & Reloading  Hop To Forums  Gunsmithing    Are G33/40's and pre-64 model 70 barrels compatable?

Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Are G33/40's and pre-64 model 70 barrels compatable?
 Login/Join
 
One of Us
posted
Can you screw a pre-64 Win Model 70 barrel onto a G33/40, and if so, will it damage the G33/40 threads?


Matt
FISH!!

Heed the words of Winston Smith in Orwell's 1984:

"Every record has been destroyed or falsified, every book rewritten, every picture has been repainted, every statue and street building has been renamed, every date has been altered. And the process is continuing day by day and minute by minute. History has stopped. Nothing exists except an endless present in which the Party is always right."
 
Posts: 3296 | Location: Northern Colorado | Registered: 22 November 2005Reply With Quote
one of us
Picture of z1r
posted Hide Post
They are not interchangeable.




Aut vincere aut mori
 
Posts: 4865 | Location: Lakewood, CO | Registered: 07 February 2002Reply With Quote
one of us
posted Hide Post
Hey Matt, did you ever get your Rigby done?
 
Posts: 1672 | Location: Colorado, USA | Registered: 11 November 2002Reply With Quote
one of us
posted Hide Post
quote:
Originally posted by congomike:
Hey Matt, did you ever get your Rigby done?


+1

Dave
 
Posts: 1238 | Location: New Hampshire | Registered: 31 December 2001Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by ColoradoMatt:
Can you screw a pre-64 Win Model 70 barrel onto a G33/40, and if so, will it damage the G33/40 threads?


Yes It will go but you need to turn it in REALLY tight. dancing


Jim Kobe
10841 Oxborough Ave So
Bloomington MN 55437
952.884.6031
Professional member American Custom Gunmakers Guild

 
Posts: 5531 | Location: Minnesota | Registered: 10 July 2002Reply With Quote
one of us
Picture of D Humbarger
posted Hide Post
G 33/40 12tpi x.980 OD
Win M70 16TPI x 1.000 OD



Doug Humbarger
NRA Life member
Tonkin Gulf Yacht Club 72'73.
Yankee Station

Try to look unimportant. Your enemy might be low on ammo.
 
Posts: 8351 | Location: Jennings Louisiana, Arkansas by way of Alabama by way of South Carloina by way of County Antrim Irland by way of Lanarkshire Scotland. | Registered: 02 November 2001Reply With Quote
One of Us
posted Hide Post
The reason I asked is that I saw a G33/40 for sale on the web with a pre-64 model 70 barrel screwed on it (257 Roberts). After a long look a the photo's, it looks like the barrel was set back quite a bit (enough obviously).

As for the Rigby project, my gunmaker has finally gotten a start on shaping the barrel. I broke my thumb in June, (the same day my daughter got brace$$$), and was out of work for a few months. Just had a run of bad luck this summer. I'm back in the saddle again, however. The Rigby magnum bottom metal that I got from Wisners seems to be a bit too wide (Fits 1917 Enfeilds real well). On the hunt again for bottom metal. I would really like to get some measurements from an original from the 50's era.
Matt


Matt
FISH!!

Heed the words of Winston Smith in Orwell's 1984:

"Every record has been destroyed or falsified, every book rewritten, every picture has been repainted, every statue and street building has been renamed, every date has been altered. And the process is continuing day by day and minute by minute. History has stopped. Nothing exists except an endless present in which the Party is always right."
 
Posts: 3296 | Location: Northern Colorado | Registered: 22 November 2005Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Guns, Politics, Gunsmithing & Reloading  Hop To Forums  Gunsmithing    Are G33/40's and pre-64 model 70 barrels compatable?

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia