THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Rem700 trigger guard for sale
 Login/Join
 
One of Us
posted
Rem 700 BDL matte finish for med action ,243 size.No spring or box.unused,a take off. $70.00
 
Posts: 49 | Location: Maryland | Registered: 25 July 2006Reply With Quote
One of Us
posted Hide Post
8x63,
I don't think that is much cheaper than PT&Gs custom in either CM,SS, or alum.
Butch
 
Posts: 8964 | Location: Poetry, Texas | Registered: 28 November 2004Reply With Quote
one of us
Picture of triggerguard1
posted Hide Post
Hey Butch,
Did you ever get a chance to see one of those that Dave was making?

I heard a lot about them, but the only thing I've see so far was his sales flyer with our part in the picture.

Just so you know, I'm not ragging on you about it at all, just curious if anyone ever got their hands one.


Williams Machine Works

 
Posts: 1021 | Location: Prineville, OR 97754 | Registered: 14 July 2002Reply With Quote
One of Us
posted Hide Post
Hi Matt,
I know that we have had a little give and take. I have an aluminum and a stainless one in short action.
I do like the looks of your better. Do you have a cm ADL trigger guard?
Butch
 
Posts: 8964 | Location: Poetry, Texas | Registered: 28 November 2004Reply With Quote
one of us
Picture of triggerguard1
posted Hide Post
I do and I apologize for the day I was running kinda short with you too.......

I honestly hadn't seen if Pacific Tool and Gauge had actually made a guard yet, or they were just talking about it.
Nothing on their site would indicate that they do and when someone posted on 24hourcampfire about a product brochure, they posted a pic of our bottom metal. I later received the flyer Dave was handing out that had a picture of our Remington bottom metal on it. Needless to say, I was a little upset about the whole debacle.

That is only one of many stories that have revolved around Dave's bottom metal, and none so far had proved that he actually made one of his own.......no offense to you intended.


Williams Machine Works

 
Posts: 1021 | Location: Prineville, OR 97754 | Registered: 14 July 2002Reply With Quote
One of Us
posted Hide Post
Matt,
If you will click on this link and scroll down to the Pacific Tool part, you can see some bottom metal. What is shown is ugly in color, but others are available. http://www.6mmbr.com/shotshow2008.html
I did not see your trigger guards in Brownells, do I just go to your website and order there?
Butch
 
Posts: 8964 | Location: Poetry, Texas | Registered: 28 November 2004Reply With Quote
one of us
Picture of triggerguard1
posted Hide Post
yep.....that's where were selling the ones you're after.


Williams Machine Works

 
Posts: 1021 | Location: Prineville, OR 97754 | Registered: 14 July 2002Reply With Quote
One of Us
posted Hide Post
as per saeeds instructions - things for sales go in the classified section
 
Posts: 13466 | Location: faribault mn | Registered: 16 November 2004Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia