THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
stock wood identification
 Login/Join
 
One of Us
posted
I just bought a old rifle primarily for the barrelled action: a pre-64 M70 .375. However, it has a non-original stock that can likely be made to be functional but is far from classic. I've started to do some re-shaping and underneath the finish it is a very light color. I know woods fairly well: I build cabinets and furniture but this has me stumped. It definitely isn't black walnut: hardly no figure: I would guess its a vintage Bishop or Fajen: any ideas on what type of wood it is?
 
Posts: 367 | Registered: 08 January 2017Reply With Quote
One of Us
posted Hide Post
I guess it could be about anything but Bishop and Fajen dealt primarily in American Black Walnut. A picture would help.
Phil
 
Posts: 361 | Location: Missouri | Registered: 09 July 2008Reply With Quote
One of Us
posted Hide Post
or a short time, Fajen, I believe, was touting Sycamore. Could that be it?
 
Posts: 3670 | Location: Phone: (253) 535-0066 / (253) 230-5599, Address: PO Box 822 Spanaway WA 98387 | www.customgunandrifle.com | Registered: 16 April 2013Reply With Quote
One of Us
posted Hide Post
Post a picture if you can. I have a sycamore stock to compare yours with.
 
Posts: 247 | Registered: 24 August 2008Reply With Quote
One of Us
Picture of dpcd
posted Hide Post
My guess is that is is Black Walnut, which ranges from white (sap wood) to black and everything in between. It varies tremendously depending on where and how it grew.
That is why they invented stains.
Post a picture. As stated, they used 99.9% black walnut.
 
Posts: 17386 | Location: USA | Registered: 02 August 2009Reply With Quote
One of Us
Picture of richj
posted Hide Post
I always loved the old Varmint rifle in Guns & Ammo. It was in tons of issues. Blonde walnut.
 
Posts: 6526 | Location: NY, NY | Registered: 28 November 2005Reply With Quote
One of Us
posted Hide Post
got some pictures of the stock but can't figure out how to get them posted. thought I saw a recent question by someone else dealing with this on the AR site but can't find it. need help.
 
Posts: 367 | Registered: 08 January 2017Reply With Quote
One of Us
Picture of dpcd
posted Hide Post
email
 
Posts: 17386 | Location: USA | Registered: 02 August 2009Reply With Quote
one of us
posted Hide Post
I would have to have the wood in hand to offer a suggestion...but bet I could, and perhaps from a picture, lots of low grade wood fits that description..Stain is never an option IMO and if your going to put a lot of time and effort into a stock, buy a good grade of good wood, properly laid out and cured..otherwise use pine! shocker


Ray Atkinson
Atkinson Hunting Adventures
10 Ward Lane,
Filer, Idaho, 83328
208-731-4120

rayatkinsonhunting@gmail.com
 
Posts: 42226 | Location: Twin Falls, Idaho | Registered: 04 June 2000Reply With Quote
One of Us
Picture of Mike_Dettorre
posted Hide Post
the stock







Mike

Legistine actu quod scripsi?

Never under estimate the internet community's ability to reply to your post with their personal rant about their tangentially related, single occurrence issue.




What I have learned on AR, since 2001:
1. The proper answer to: Where is the best place in town to get a steak dinner? is…You should go to Mel's Diner and get the fried chicken.
2. Big game animals can tell the difference between .015 of an inch in diameter, 15 grains of bullet weight, and 150 fps.
3. There is a difference in the performance of two identical projectiles launched at the same velocity if they came from different cartridges.
4. While a double rifle is the perfect DGR, every 375HH bolt gun needs to be modified to carry at least 5 down.
5. While a floor plate and detachable box magazine both use a mechanical latch, only the floor plate latch is reliable. Disregard the fact that every modern military rifle uses a detachable box magazine.
6. The Remington 700 is unreliable regardless of the fact it is the basis of the USMC M40 sniper rifle for 40+ years with no changes to the receiver or extractor and is the choice of more military and law enforcement sniper units than any other rifle.
7. PF actions are not suitable for a DGR and it is irrelevant that the M1, M14, M16, & AK47 which were designed for hunting men that can shoot back are all PF actions.
8. 95 deg F in Africa is different than 95 deg F in TX or CA and that is why you must worry about ammunition temperature in Africa (even though most safaris take place in winter) but not in TX or in CA.
9. The size of a ding in a gun's finish doesn't matter, what matters is whether it’s a safe ding or not.
10. 1 in a row is a trend, 2 in a row is statistically significant, and 3 in a row is an irrefutable fact.
11. Never buy a WSM or RCM cartridge for a safari rifle or your go to rifle in the USA because if they lose your ammo you can't find replacement ammo but don't worry 280 Rem, 338-06, 35 Whelen, and all Weatherby cartridges abound in Africa and back country stores.
12. A well hit animal can run 75 yds. in the open and suddenly drop with no initial blood trail, but the one I shot from 200 yds. away that ran 10 yds. and disappeared into a thicket and was not found was lost because the bullet penciled thru. I am 100% certain of this even though I have no physical evidence.
13. A 300 Win Mag is a 500 yard elk cartridge but a 308 Win is not a 300 yard elk cartridge even though the same bullet is travelling at the same velocity at those respective distances.
 
Posts: 10169 | Location: Loving retirement in Boise, ID | Registered: 16 December 2003Reply With Quote
One of Us
posted Hide Post
Birch?

Zeke
 
Posts: 2270 | Registered: 27 October 2011Reply With Quote
One of Us
Picture of Mike_Dettorre
posted Hide Post
BTW, nice checkering pattern.


Mike

Legistine actu quod scripsi?

Never under estimate the internet community's ability to reply to your post with their personal rant about their tangentially related, single occurrence issue.




What I have learned on AR, since 2001:
1. The proper answer to: Where is the best place in town to get a steak dinner? is…You should go to Mel's Diner and get the fried chicken.
2. Big game animals can tell the difference between .015 of an inch in diameter, 15 grains of bullet weight, and 150 fps.
3. There is a difference in the performance of two identical projectiles launched at the same velocity if they came from different cartridges.
4. While a double rifle is the perfect DGR, every 375HH bolt gun needs to be modified to carry at least 5 down.
5. While a floor plate and detachable box magazine both use a mechanical latch, only the floor plate latch is reliable. Disregard the fact that every modern military rifle uses a detachable box magazine.
6. The Remington 700 is unreliable regardless of the fact it is the basis of the USMC M40 sniper rifle for 40+ years with no changes to the receiver or extractor and is the choice of more military and law enforcement sniper units than any other rifle.
7. PF actions are not suitable for a DGR and it is irrelevant that the M1, M14, M16, & AK47 which were designed for hunting men that can shoot back are all PF actions.
8. 95 deg F in Africa is different than 95 deg F in TX or CA and that is why you must worry about ammunition temperature in Africa (even though most safaris take place in winter) but not in TX or in CA.
9. The size of a ding in a gun's finish doesn't matter, what matters is whether it’s a safe ding or not.
10. 1 in a row is a trend, 2 in a row is statistically significant, and 3 in a row is an irrefutable fact.
11. Never buy a WSM or RCM cartridge for a safari rifle or your go to rifle in the USA because if they lose your ammo you can't find replacement ammo but don't worry 280 Rem, 338-06, 35 Whelen, and all Weatherby cartridges abound in Africa and back country stores.
12. A well hit animal can run 75 yds. in the open and suddenly drop with no initial blood trail, but the one I shot from 200 yds. away that ran 10 yds. and disappeared into a thicket and was not found was lost because the bullet penciled thru. I am 100% certain of this even though I have no physical evidence.
13. A 300 Win Mag is a 500 yard elk cartridge but a 308 Win is not a 300 yard elk cartridge even though the same bullet is travelling at the same velocity at those respective distances.
 
Posts: 10169 | Location: Loving retirement in Boise, ID | Registered: 16 December 2003Reply With Quote
one of us
posted Hide Post
Looks like it could be maple.
 
Posts: 3837 | Location: SC,USA | Registered: 07 March 2002Reply With Quote
One of Us
posted Hide Post
My guess is light colored American Black Walnut. It always appears lighter with no finish. Put some water or mineral spirits on it to get an approximation of what it will look like when finished.
Phil
 
Posts: 361 | Location: Missouri | Registered: 09 July 2008Reply With Quote
One of Us
posted Hide Post
I go with birch , if real heavy and tight grain then maple , but I doubt it . Looks more like birch
 
Posts: 227 | Location: South Florida  | Registered: 03 February 2017Reply With Quote
One of Us
posted Hide Post
Birch would be my take.
 
Posts: 8169 | Location: humboldt | Registered: 10 April 2002Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia