THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Winchester 70 B.O.S.S. system thread measurement
 Login/Join
 
one of us
posted
Does anyone happen to know what the threading measurement is on the Winchester 70 BOSS rifles that were made and discontinued a few year ago? Could it possibly be 5/8"x24?
 
Posts: 203 | Location: in & of Dixie | Registered: 17 November 2002Reply With Quote
One of Us
posted Hide Post
All I could find was the thread size is different for the .338 Win Mag. as apposed to the other Calibers .

A Smith who has worked on them needs this question or you need a thread gauge so as to check it .

Shoot Straight know Your Target . ... salute
 
Posts: 1738 | Location: Southern Calif. | Registered: 08 April 2006Reply With Quote
one of us
Picture of Toomany Tools
posted Hide Post
The ones I have are 9/16" - 24


John Farner

If you haven't, please join the NRA!
 
Posts: 2949 | Location: Corrales, NM, USA | Registered: 07 February 2001Reply With Quote
one of us
posted Hide Post
Thanks much for the info. John, are yours smaller calibers than .338WM?
 
Posts: 203 | Location: in & of Dixie | Registered: 17 November 2002Reply With Quote
one of us
Picture of Toomany Tools
posted Hide Post
The ones I have aren't installed. A friend had three or four still in the boxes and gave them to me for possible use as muzzle brakes.


John Farner

If you haven't, please join the NRA!
 
Posts: 2949 | Location: Corrales, NM, USA | Registered: 07 February 2001Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia