THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Ed Lapour
 Login/Join
 
One of Us
posted
Does anybody have a good email for Ed Lapour. His site is not active and email listed on ACGG does not work. Thanks.
 
Posts: 1197 | Location: Wyoming | Registered: 04 April 2009Reply With Quote
One of Us
posted Hide Post
ed@edlapourgunsmithing.com, this is his email I've used to communicate with him in the past but that was in 2018
 
Posts: 522 | Registered: 07 June 2013Reply With Quote
One of Us
posted Hide Post
Same email as ACGG, no good apparently. Anybody.
 
Posts: 1197 | Location: Wyoming | Registered: 04 April 2009Reply With Quote
one of us
posted Hide Post
I sent Ed an email in Feb. 2020. I also received a reply from him via email. Both were "ed@edlapourgunsmithing.com"
 
Posts: 251 | Location: Newport, WA | Registered: 06 December 2002Reply With Quote
One of Us
posted Hide Post
I read a post somewhere today indicating Ed had retired. That's all I have.
Stephen
 
Posts: 538 | Location: Pacific Northwet | Registered: 14 August 2010Reply With Quote
One of Us
posted Hide Post
I believe Ed sold, or something, the rights to his safeties to a guy in Indiana, Nate Lambeth.


Jim Kobe
10841 Oxborough Ave So
Bloomington MN 55437
952.884.6031
Professional member American Custom Gunmakers Guild

 
Posts: 5534 | Location: Minnesota | Registered: 10 July 2002Reply With Quote
One of Us
posted Hide Post
I think Nate Meyers is working on the 3 position safeties:

https://www.myersarms.com/lapo...osition-bolt-shrouds
 
Posts: 3770 | Location: Boulder Colorado | Registered: 27 February 2004Reply With Quote
One of Us
posted Hide Post
Nate Meyers is a good man, have had good experiences with him over the years, also very knowledgeable.
 
Posts: 522 | Registered: 07 June 2013Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by skb:
I think Nate Meyers is working on the 3 position safeties:

https://www.myersarms.com/lapo...osition-bolt-shrouds


You are correct,. And I have been waiting on a three position one for a Springfield for some time.


Jim Kobe
10841 Oxborough Ave So
Bloomington MN 55437
952.884.6031
Professional member American Custom Gunmakers Guild

 
Posts: 5534 | Location: Minnesota | Registered: 10 July 2002Reply With Quote
One of Us
posted Hide Post
I too have had good experience with Nathaniel. I also have a springfield safety on order, they are coming. Some hiccups due to covid.
 
Posts: 1197 | Location: Wyoming | Registered: 04 April 2009Reply With Quote
One of Us
posted Hide Post
Ed's email/website was recently hacked and he lost his website. Upon contacting the company that managed his website, he found that they were out of business.

A good lesson for all of us...

kda55, I will shortly email you Ed's email.

Springfields are at heat treat, hoping to hear good news this week!


Nathaniel Myers
Myers Arms LLC
nathaniel@myersarms.com
www.myersarms.com
Follow us on Instagram and YouTube

I buy Mauser actions, parts, micrometers, tools, calipers, etc. Specifically looking for pre-WWII Mauser tools.
 
Posts: 1527 | Location: Ohio | Registered: 06 June 2010Reply With Quote
One of Us
posted Hide Post
Thank you Nathaniel.
 
Posts: 1197 | Location: Wyoming | Registered: 04 April 2009Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia