THE ACCURATERELOADING.COM GUNSMITHING FORUM

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Guns, Politics, Gunsmithing & Reloading  Hop To Forums  Gunsmithing    Winchester model 1912, need help. How to 'plug' for ducks?

Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Winchester model 1912, need help. How to 'plug' for ducks?
 Login/Join
 
One of Us
posted
Gentlemen, my son(14) got a winchester model 1912 12-Ga pump from grandpa. He would like to use it for duck hunting as well as upland game, but so far we are stumped as to how to open the top of the tubular magazine to put a plug in it. We have tried everything that looks obvious to do but to no avail. Does anyone have any experience or insight into this shotgun? If you know any tricks please let me know. Thanks, Barry
 
Posts: 52 | Location: Midwester | Registered: 14 August 2007Reply With Quote
One of Us
posted Hide Post
This is not rocket science, but slightly tricky. The sliding lock at the muzzle end of the magazine must be removed. there's a visible spring that runs parallel with the sliding lock. depress that spring with a small screwdriver. or penknife and the lock will slide out of the cap....then take out the two opposing 6x40 filister head screws..Now....the magazine spring will leap out and fly across the room...put in a plug (commercial variety) or maybe even a dowel to reduce magazine capacity to two rounds, reassemble and you're LEGAL...best of luck to the lad!
 
Posts: 2221 | Location: Tacoma, WA | Registered: 31 October 2003Reply With Quote
One of Us
posted Hide Post
GREAT advice from Duane; just be very carful when you remove the end plug, the spring WILL leap out. Also remember which direction the parts went in. If you need help, give me a call.

Jim


Jim Kobe
10841 Oxborough Ave So
Bloomington MN 55437
952.884.6031
Professional member American Custom Gunmakers Guild

 
Posts: 5523 | Location: Minnesota | Registered: 10 July 2002Reply With Quote
One of Us
Picture of Rick R
posted Hide Post
Not plug related, and I'm just asking because my dad has two M-12's. But should you be careful with steel shot in these old guns?
 
Posts: 1912 | Location: Charleston, WV, USA | Registered: 10 January 2003Reply With Quote
one of us
posted Hide Post
Rick
If they are full choke I would not shoot anything larger in shot size than #2 or 3. If they are modified BB or smaller. I have shot a few cases through my modified barrel with no problems.

www.duanesguns.com
 
Posts: 869 | Location: N Dakota | Registered: 29 December 2003Reply With Quote
One of Us
Picture of vapodog
posted Hide Post
just between us chickens, I'd reserve that M-12 for upland birds where I can use lead shot and find a cheap 870 for ducks with screwin chokes and steel shot.

I've not used some of the other non-lead shot and maybe some of the other stuff is better on the old barrels.....but I'd be reluctant to shoot steel in it at all.


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
 
Posts: 28849 | Location: western Nebraska | Registered: 27 May 2003Reply With Quote
One of Us
posted Hide Post
Thanks Duane, it worked like a charm. He's ready to go and season opens tomorrow. Smiler
Barry
quote:
Originally posted by Duane Wiebe:
This is not rocket science, but slightly tricky. The sliding lock at the muzzle end of the magazine must be removed. there's a visible spring that runs parallel with the sliding lock. depress that spring with a small screwdriver. or penknife and the lock will slide out of the cap....then take out the two opposing 6x40 filister head screws..Now....the magazine spring will leap out and fly across the room...put in a plug (commercial variety) or maybe even a dowel to reduce magazine capacity to two rounds, reassemble and you're LEGAL...best of luck to the lad!
 
Posts: 52 | Location: Midwester | Registered: 14 August 2007Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Guns, Politics, Gunsmithing & Reloading  Hop To Forums  Gunsmithing    Winchester model 1912, need help. How to 'plug' for ducks?

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia