THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Mystery M98 bolt body ID?
 Login/Join
 
One of Us
posted
This should be easy for a Mauser person.
I have 98 type bolt body that has the following:

1. Shorter than normal
2. Gas vent slots are obround but more narrow than normal.
3. When the bolt is face is viewed with the lugs horizontal there is a small groove cut in the bolt face rim at 12 oclock.
4. It is not Yugo - (it has the projections on the front end of the split left locking lug)
5. Other than a serial number on the arsenal bent bolt handle it only has one other marking
--a V in a circle on the rear of the bolt hand root.

Paper weight or did I find a good bolt for something?
 
Posts: 13978 | Location: http://www.tarawaontheweb.org/tarawa2.jpg | Registered: 03 December 2008Reply With Quote
one of us
posted Hide Post
sounds like a 1936 Mexican intermediate lenght
 
Posts: 475 | Registered: 16 December 2003Reply With Quote
One of Us
posted Hide Post
Second that, sound like a 36 mex. the original extactor would have a hole to line up with the vent notch in the rim.
Don
 
Posts: 1085 | Location: Detroit MI | Registered: 28 March 2006Reply With Quote
One of Us
posted Hide Post
Just like my 1936. Do you have the cocking piece by chance?

Jerry Liles
 
Posts: 531 | Location: Louisiana | Registered: 01 January 2010Reply With Quote
One of Us
posted Hide Post
If your bolt is extra to your needs, please let me know. I have a mex mauser project and the bolt is a little more pitted than I prefer.

thanks


Nathaniel Myers
Myers Arms LLC
nathaniel@myersarms.com
www.myersarms.com
Follow us on Instagram and YouTube

I buy Mauser actions, parts, micrometers, tools, calipers, etc. Specifically looking for pre-WWII Mauser tools.
 
Posts: 1511 | Location: Ohio | Registered: 06 June 2010Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia