The Accurate Reloading Forums
Wrist crack help!!
09 December 2019, 19:11
DulcineaWrist crack help!!
Gentleman,
20 years ago my Sako AV was glass and pillar bedded. In 2007 I noticed a tiny crack behind the rear action screw(on top). Today was cleaning and put away day and the crack has grown to about half an inch.
This is the shiny lacquer stock.
Can this be fixed?
Is anyone willing to do it?
As always AR rocks!!
Keith Prowell
What counts is what you learn after you know it all!!!
09 December 2019, 19:13
DulcineaTwo additions.
When I noticed the crack I relieved the tang contact.
Pics available on request
Keith
What counts is what you learn after you know it all!!!
09 December 2019, 20:59
Jim KobeThat is probably why it cracked in the first place, sorry. So it is not in the wrist, it is on top behind the rear tang?
Jim Kobe
10841 Oxborough Ave So
Bloomington MN 55437
952.884.6031
Professional member American Custom Gunmakers Guild
09 December 2019, 21:56
DulcineaYes on top behind tang.
What counts is what you learn after you know it all!!!
09 December 2019, 22:44
AtkinsonYes it can be fixed, drill under the crack glass it, match the finish over the crack, I would bleach the crack after its repaired then try some stain, and finish...The sako is probably light wood and that's a problem, but time and effort will hide the crack, maybe even a marks a lot to look like grain..depends on the wood color,Ive done a number of them wherein the break or crack could be hidden even in the sunlight..done some that were not so good, but always better than a crack, a crack grows so the sooner fixed the better. Its ok to relieve the tang but the problem is most folks over do it, you can relieve the tang without a horriblel gap, more like a hairs width..Two cross bolts can make a big difference in preventing cracks..I like them and I have them engraved and blued or case hardened..Some don't care for cross bolts, so threaded bolts that don't show are an option..
Ray Atkinson
Atkinson Hunting Adventures
10 Ward Lane,
Filer, Idaho, 83328
208-731-4120
rayatkinsonhunting@gmail.com
09 December 2019, 22:59
DulcineaThanks,
But I have no intention of trying to fix it myself...
What counts is what you learn after you know it all!!!
10 December 2019, 04:35
BobsterSometimes it is the rear action screw and not the tang. Make sure the screw is not contacting the stock.
10 December 2019, 06:23
AtkinsonOK, then I suggest you send it to Dennis Olson, plains Mt. to get it fixed..he is reasonable and does good work..
Ray Atkinson
Atkinson Hunting Adventures
10 Ward Lane,
Filer, Idaho, 83328
208-731-4120
rayatkinsonhunting@gmail.com
11 December 2019, 02:51
Alec TorresI suggest Dennis Earle Smith - aka The Stock Doctor. He has done a lot of this type of work and is a Guild member. He has done some good work for me...
Phone: 541-483-2182
Email: thestockdr@hotmail.com
Mailing Address:83134 Tygh Valley Road, Tygh Valley, OR 97063-9797
11 December 2019, 18:19
DulcineaThanks. Much appreciated
What counts is what you learn after you know it all!!!