The Accurate Reloading Forums
Screws

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/694101051

20 October 2004, 12:46
wiktor
Screws
Hi Guys, I found out the two possible screws I need to mount the tang sight on my Remington 14. They are 6-44 UNEF or 5-44 UNF. Does anyone know where I can possibly find these in a fillister head? Also, what on earth does UNEF stand for? Thanks!
20 October 2004, 13:06
Gringo Cazador
It doesnt seem to come up anywhere, and I thought this like was kind of funny.

It must be from yrs back.

http://www.acronymfinder.com/af-query.asp?p=dict&String=exact&Acronym=UNEF
20 October 2004, 14:30
Glen71
Try this site (scroll down to specifications): screw pitch specifications
21 October 2004, 05:17
Clark
I have made screws on the lathe with a just a lathe, and I have made screws on the lathe with a die to cut the threads.

I suggest buying the die.



adjustable 5-44 die at J&L



I think they put the same die picture in the website for all the dies. This on does not say 5-55 on it, but I have bought specialty dies like this from them, and they send the right ones.


21 October 2004, 05:26
Atkinson
Inasmuch as the old Rem. 14s don't have a lot of collector value unless in truly mint shape, I would tend to drill and tap those holes for a standard size screw, such as a 6x48 or 8-40 or what ever is a tad larger.
21 October 2004, 05:44
scot
My Model 14 1/2 was 6-48.