The Accurate Reloading Forums
375-338 Taylor

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/68310764

31 January 2003, 18:37
CampX
375-338 Taylor
I'm getting a 375-338 Chatfield Taylor built, and am interested in any pet loads or advice for this. Mainly gonna be shooting 235 gr to 270 gr bullets (235 gr "plinkers"). Building it on a Tikka 7mm M-695 that I won in a raffle...thanks.
01 February 2003, 03:17
<RickMD>
Start with reasonable loads (with the same bullet weight) listed for a .338 WM or a .358 Norma mag. and cautiously work up. When you see the first sign of pressure back off two grains. That's your maximum load.

Medium burning powders are the best for the .375/.338.
01 February 2003, 04:19
jeffeosso
start with 376 steyr loads... and work up
just about the same capacity, and the 376 is smaller, so the loads would be lighter...
jeffe
01 February 2003, 05:47
Bill Leeper
Loadings are essentially the same as for the 375H&H. Most guys Ibuilt them for ended up using 4064 with 270 gr bullets. One of my favourite wildcats. Regards, Bill.