Anyone have dimensions for a Savage/Stevens 110 sear bushing so one can be made? Buddy lost his when removing the trigger.

Or maybe someone has one they can part with?

That will be one expensive bushing if your going to pay someone to make it. You might be able to get one from Brownell's or Numrich.

If you're going to make it yourself, figuring out the dimensions won't be hard. It fits inside the coil of the sear spring so that's the OD. The sear pin goes through the center so that plus a bit of clearance is the ID. The width of the sear spring coils is the length.

It's not a precision part. It's just intended to take up the space between the spring coils and the pin. Make sure it does that without binding and you've got it.

Thanx - problem solved.