THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Stock Finish Question
 Login/Join
 
One of Us
posted
I just bought a Remington LSS and would like to get rid of the shiney finish. Should I use a fine steel wool, or is there a better way?
 
Posts: 83 | Registered: 06 February 2007Reply With Quote
one of us
Picture of ramrod340
posted Hide Post
We beat this horse every few months. Here is a link to the last discussion. Bottomline steel wool will work but best way is to replace.

https://forums.accuratereloading.com/eve/forums/a/tpc/f/...=298103595#298103595


As usual just my $.02
Paul K
 
Posts: 12881 | Location: Mexico, MO | Registered: 02 April 2001Reply With Quote
One of Us
posted Hide Post
Thanks Ramrod, I did a search but didn't come up with a post. I had the experience with a BDL, the shine comes back.

I have a couple of new Winchesters, ones a classic the others a featherweight. The finish always looks dry and unprotected on both stocks. Is there anything I can use to seal or put an oil finish on these stocks?
 
Posts: 83 | Registered: 06 February 2007Reply With Quote
one of us
Picture of ramrod340
posted Hide Post
quote:
I have a couple of new Winchesters, ones a classic the others a featherweight. The finish always looks dry and unprotected on both stocks. Is there anything I can use to seal or put an oil finish on these stocks?

I'm sure there is some type of oil finish soaked in the wood instead of the BDL sprayed on the wood. I would simply wax the heck out of it with a good paste wax..


As usual just my $.02
Paul K
 
Posts: 12881 | Location: Mexico, MO | Registered: 02 April 2001Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia