guys have a 44 mag.b92 browning.who makes peep sights that will fit it.and can someone besides gunsmith fit them...thanks as always for your help......gfg

Lyman or Marble�s make such. Brownell�s list another one, I forgot which. I�ve heard Marble�s gave trouble first, should work now. Lyman�s don�t have windage adjustment!!

There are gunsmith installation and simple screw installation ones, read carefully. But the prices are from $ 70 to ~ 150 IIRC.

I have one such thing ( 92 ), too, but I�ll leave it as is. Its new, without box. Perhaps a peep on my Browning 86 Carbine. For what do you use yours? Cowboy, plinking, hunting?

Hermann

------------------

just plinking, and can,t hit anything past 75
yards with the buckhorn sites...thanks

Remove the rear sight to preserve some collector value the rifle might have. Use a Marbles rear sight of flat top configuration and file notch to your liking. Eventually use a folding down, which will fit fine to your peep project later. Get to a modelling shop and buy Humbrol matte Signal Orange. Degrease front sight and apply two coats at the back of it.

Just try it, works well in woods, too.

Hermann

------------------

Are you talking about a tang sight or a receiver sight? A receiver sight, of course, has W & E adjustments, but requires drilling and tapping. I put a Williams Foolproof on my M65 .218 Bee. Works great, with an old Redfield Sourdough blade in the front ramp.

will look at both....thanks