THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
decent barrel????
 Login/Join
 
one of us
posted
green mountain has 17", 308 cal, 1:10 twist bull barrels on sale for 35 bucks. not chambered, contoured, or crowned...just a cylinder with a hole in it. has anyone used one of these for a project and if so, how are they quality wise?

thanks


blaming guns for crime is like blaming silverware for rosie o'donnell being fat
 
Posts: 1213 | Location: new braunfels, tx | Registered: 04 December 2001Reply With Quote
One of Us
posted Hide Post
not familiar with that barrel, but if you 're buying a plain blank, be prepared to spend some money getting it contoured. 35 might not end up so cheap afterall
 
Posts: 13466 | Location: faribault mn | Registered: 16 November 2004Reply With Quote
One of Us
posted Hide Post
I've read a couple reports where guys that built 300 whisper/BLK with these barrels on AR platforms were pleased with the performance. I've seriously considered building a 300BLK upper with these barrels but the recent run on AR components set my schedule back.

If you are doing the work yourself, you can't hardly go wrong for that price. If you are paying someone else, I might be inclined to invest in a more known commodity.
 
Posts: 714 | Location: Milwaukee, Wisconsin | Registered: 09 October 2003Reply With Quote
One of Us
Picture of dpcd
posted Hide Post
I have used many GM barrels; both muzzle loading and BP cartridge. They are good barrels. If you have ever used an Adams and Bennett from Midway, chances are 50-50 it was from GM. The reason they are cheap is that they are only 17 inches long. I always assume people can do their own contouring. If not, they should not get basic blanks.
 
Posts: 17385 | Location: USA | Registered: 02 August 2009Reply With Quote
one of us
posted Hide Post
thanks folks. i figure for $35 i'll use it for something. maybe stick it on a rem 600 and leave it full bull. always need something different.


blaming guns for crime is like blaming silverware for rosie o'donnell being fat
 
Posts: 1213 | Location: new braunfels, tx | Registered: 04 December 2001Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia