in the process of pillar bedding this rifle i managed to get some devcon 10110 steel putty on the top of the stock near the recoil pad. 2 small spots,i lightly sanded it off and it left 2 light spots about the size of a nickel and a quarter. it is a blond colored stock. does anyone know of something i can use to touch it up and have a closer color match to the original finish. thankyou for any ideas.

If it has no stain I use Superglue for those small areas. Wipe it on and then sand with 600# wet & dry and water and then after I build up a couple of coats I lightly buff it to match the gloss. Superglue cures solid in minutes.

Practice on something else first. If you don't like what you see, don't use it.

Rod thankyou for the reply. I'll check it out.