THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Reassembling Miroku 38 special revolver
 Login/Join
 
one of us
posted
Hi,
Does anyone have instructions for reassembling a Miroku 38 special revolver? A buddy has one and I helped take it apart to clean, not even a full take down because it isn’t the same as smiths which are all I’m familiar with. Just opened it and cleaned as much as possible. However, the hand, which has a connected spring, looks like it has to be in the side plate before assembly, but he’ll if I can get it together then get it to align and get on its pin. Just a complete MF’er. Good looking for and finish but I’d never want anything this big a pain in the ass.
Pics would help, a video would be awesome but YouTube has failed me

Red
 
Posts: 4740 | Location: Fresno, CA | Registered: 21 March 2003Reply With Quote
One of Us
posted Hide Post
No instructions,,but here are a couple of what are labled as Miroku/Liberty DA revolvers.
Might help


 
Posts: 564 | Registered: 08 June 2008Reply With Quote
One of Us
Picture of Mike_Dettorre
posted Hide Post
Dago,

Good to see you post.

This may help a little.

https://www.thehighroad.org/in...bly-question.505693/

Also, maybe join that site and PM the guy who offered the solution for the miroku.


Mike

Legistine actu? Quid scripsi?

Never under estimate the internet community's ability to reply to your post with their personal rant about their tangentially related, single occurrence issue.




What I have learned on AR, since 2001:
1. The proper answer to: Where is the best place in town to get a steak dinner? is…You should go to Mel's Diner and get the fried chicken.
2. Big game animals can tell the difference between .015 of an inch in diameter, 15 grains of bullet weight, and 150 fps.
3. There is a difference in the performance of two identical projectiles launched at the same velocity if they came from different cartridges.
4. While a double rifle is the perfect DGR, every 375HH bolt gun needs to be modified to carry at least 5 down.
5. While a floor plate and detachable box magazine both use a mechanical latch, only the floor plate latch is reliable. Disregard the fact that every modern military rifle uses a detachable box magazine.
6. The Remington 700 is unreliable regardless of the fact it is the basis of the USMC M40 sniper rifle for 40+ years with no changes to the receiver or extractor and is the choice of more military and law enforcement sniper units than any other rifle.
7. PF actions are not suitable for a DGR and it is irrelevant that the M1, M14, M16, & AK47 which were designed for hunting men that can shoot back are all PF actions.
8. 95 deg F in Africa is different than 95 deg F in TX or CA and that is why you must worry about ammunition temperature in Africa (even though most safaris take place in winter) but not in TX or in CA.
9. The size of a ding in a gun's finish doesn't matter, what matters is whether it’s a safe ding or not.
10. 1 in a row is a trend, 2 in a row is statistically significant, and 3 in a row is an irrefutable fact.
11. Never buy a WSM or RCM cartridge for a safari rifle or your go to rifle in the USA because if they lose your ammo you can't find replacement ammo but don't worry 280 Rem, 338-06, 35 Whelen, and all Weatherby cartridges abound in Africa and back country stores.
12. A well hit animal can run 75 yds. in the open and suddenly drop with no initial blood trail, but the one I shot from 200 yds. away that ran 10 yds. and disappeared into a thicket and was not found was lost because the bullet penciled thru. I am 100% certain of this even though I have no physical evidence.
13. A 300 Win Mag is a 500 yard elk cartridge but a 308 Win is not a 300 yard elk cartridge even though the same bullet is travelling at the same velocity at those respective distances.
 
Posts: 10157 | Location: Loving retirement in Boise, ID | Registered: 16 December 2003Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia