THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Canjar Triggers
 Login/Join
 
one of us
posted
Hey all,

I have a Canjar set trigger in my Enfield action that somehow the pin for the set fell out and of course so did the set.. Does anyone know where I can get a replacement set? I have tried callin Canjar but can never get ahold of anyone also get there machine and havent gotten a callback.. Thanks for the help.

6.5 Bandit
 
Posts: 287 | Registered: 09 March 2003Reply With Quote
one of us
posted Hide Post
anyone?
 
Posts: 287 | Registered: 09 March 2003Reply With Quote
one of us
posted Hide Post
quote:
Originally posted by 6.5 Bandit:
anyone?

Hey Brock,

I have two single-set Canjars, one on a .22-250, the other on the 6.5-300WWH. I put one on the 6.5 due to how much I liked the first one that came on my .22-250. [Cool]

When I asked Sid to order and install the second one for me, he chuckled and said he would gladly do it, but "Good Luck". [Confused]

He told me that they were a mom & pop outfit, with more work than they can handle, very busy, very independent, and that I'd get my trigger when I got it, IF I got it, maybe, don't hold my breath, etc.. I cannot remember how long it took to get it in, but it was a good while. A year or so prior, I had requested info/brochure I never received.

Moral of the story - don't take it personally, I think they are swamped. Reminds me of Premier.

I don't know if they might respond better to a written (snail mail) request with an SASE.

I realize it's a hard way to go, but if you thought you could copy the missing part & pin, you could borrow one of mine for a pattern. I plan to put the 6.5-300 in the shop sooner or later, so it would be down anyway at that point.

Regards,
Ed
 
Posts: 588 | Location: Maryland | Registered: 08 April 2003Reply With Quote
one of us
posted Hide Post
Ed,

Thanks for the reply.. The trigger is for my 6.5/300 WWH.. I may take you up on the offer.. I will keep trying to get ahold of them.. I heard before that it takes a long time to get in contact with them.. The trigger still works fine without it so ill prolly just shoot it without it till I can get a replacement.. BTW I should have it completed this weekend if everything goes as planned.. Ran into to many problems to have it ready for the matches but it will be good to go next year.. Just gotta have it down before dec 1st. Im planning on setting it up on my grandparents porch and shooting the back mountain.. Can only get about 600yds to the back mountain but will be a good test run [Smile] I'll let ya know if I need to take you up on the offer but hopefully wont have to..

6.5 Bandit
 
Posts: 287 | Registered: 09 March 2003Reply With Quote
one of us
posted Hide Post
OK, let me know if you need it.

I know what you mean about it working well without the tab. I wonder sometimes just what influence that little "bump" has on groups. Some of my best groups were with the factory triggers set at minimum. One more thing to worry about. [Wink]
 
Posts: 588 | Location: Maryland | Registered: 08 April 2003Reply With Quote
one of us
posted Hide Post
I have one on a heavy barrel 22-250. Love the trigger, but it did take over a year get.

Tim
 
Posts: 1430 | Location: California | Registered: 21 February 2001Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia