THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
TIKKA T3 lite bedding
 Login/Join
 
new member
posted
Hi guys,
Bought a T3 lite (blued metalwork & tupperware stock) in 25-06 just for Deer, not quite up there with my custom Nesika but it was cheap. I am loading a 100 grain Speer with N160 and averaging 0.75 inch at 100 yards, not too shabby for such a light gun. However if I can improve on that with a bedding job then it is worth a few hours of my time.
The thing that I am not sure about is that the T3 recoil lug is in the stock and not a part of the action. I was thinking of bedding the recoil lug permanently into the stock as part of the Devcon bedding job then fully floating the barrel.

Your thoughts please gentelmen, is it really worth it since the stock is made from tupperware?

Steve.
 
Posts: 10 | Location: North West England | Registered: 02 August 2003Reply With Quote
one of us
posted Hide Post
I wouldnt touch it
 
Posts: 1868 | Location: League City, Texas | Registered: 11 April 2003Reply With Quote
one of us
Picture of Bill Soverns
posted Hide Post
Sub MOA is nothing I would mess with. Im with Billy.....I'd leave it be.
 
Posts: 1268 | Location: Newell, SD, USA | Registered: 07 December 2001Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia