THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
rifle stock supplier
 Login/Join
 
one of us
Picture of 500nitro
posted
Hi guys,

I am thinking of getting an inletted semi finished rifle stock from these guys http://rifle-stocks.com the prices seem keen.
Any comments or knowledge about their products?

thanks,


Harris Safaris
PO Box 853
Gillitts
RSA 3603

www.southernafricansafaris.co.za
https://www.facebook.com/pages...=aymt_homepage_panel

"There is something about safari life that makes you forget all your sorrows and feel as if you had drunk half a bottle of champagne." - Karen Blixen,
 
Posts: 1069 | Location: Durban,KZN, South Africa | Registered: 16 January 2001Reply With Quote
one of us
Picture of ramrod340
posted Hide Post
Do a search on them you will hear a lot of negative some positive. The one I got from them was inletted so poorly I coulnd't make it work and sent it back.

I've had some good blanks from http://www.gunstocks.com/

Then again you will have comments both ways from other users.


As usual just my $.02
Paul K
 
Posts: 12881 | Location: Mexico, MO | Registered: 02 April 2001Reply With Quote
One of Us
Picture of Mike_Dettorre
posted Hide Post
I would not order a stock from them.

If you lived in Los Angeles it my be worth going by and picking one out.

I order a stock for a ruger and 4 months later which was two months later than quoated my gunsmith got a stock for a inletted for a Weathherby.


Mike

Never under estimate the internet community's ability to reply to your post with their personal rant about their tangentially related, single occurrence issue.



What I have learned on AR, since 2001:
1. The proper answer to: Where is the best place in town to get a steak dinner? is…You should go to Mel's Diner and get the fried chicken.
2. Big game animals can tell the difference between .015 of an inch in diameter, 15 grains of bullet weight, and 150 fps.
3. There is a difference in the performance of two identical projectiles launched at the same velocity if they came from different cartridges.
4. While a double rifle is the perfect DGR, every 375HH bolt gun needs to be modified to carry at least 5 down.
5. While a floor plate and detachable box magazine both use a mechanical latch, only the floor plate latch is reliable. Disregard the fact that every modern military rifle uses a detachable box magazine.
6. The Remington 700 is unreliable regardless of the fact it is the basis of the USMC M40 sniper rifle for 40+ years with no changes to the receiver or extractor and is the choice of more military and law enforcement sniper units than any other rifle.
7. PF actions are not suitable for a DGR and it is irrelevant that the M1, M14, M16, & AK47 which were designed for hunting men that can shoot back are all PF actions.
8. 95 deg F in Africa is different than 95 deg F in TX or CA and that is why you must worry about ammunition temperature in Africa (even though most safaris take place in winter) but not in TX or in CA.
9. The size of a ding in a gun's finish doesn't matter, what matters is whether it’s a safe ding or not.
10. 1 in a row is a trend, 2 in a row is statistically significant, and 3 in a row is an irrefutable fact.
11. Never buy a WSM or RCM cartridge for a safari rifle or your go to rifle in the USA because if they lose your ammo you can't find replacement ammo but don't worry 280 Rem, 338-06, 35 Whelen, and all Weatherby cartridges abound in Africa and back country stores.
12. A well hit animal can run 75 yds. in the open and suddenly drop with no initial blood trail, but the one I shot from 200 yds. away that ran 10 yds. and disappeared into a thicket and was not found was lost because the bullet penciled thru. I am 100% certain of this even though I have no physical evidence.
13. A 300 Win Mag is a 500 yard elk cartridge but a 308 Win is not a 300 yard elk cartridge even though the same bullet is travelling at the same velocity at those respective distances.
 
Posts: 10138 | Location: Loving retirement in Boise, ID | Registered: 16 December 2003Reply With Quote
One of Us
posted Hide Post
last one i ordered from them i had ordered a laminated one and got a walnut one instead. the time before that i ordered a high grade walnut which broke in half at the wrist. that after a 10 month wait. hows that for a recommendation
 
Posts: 13462 | Location: faribault mn | Registered: 16 November 2004Reply With Quote
One of Us
Picture of h2oboy
posted Hide Post
The only problem that I have had with them is delivery time. You may get it in 6 months....maybe.
If they were not the only ones doing a stock for a CZ 55O I would not use them.


Dirk Schimmel
D Schimmel LLC
Dirk@DoubleRifles.Us
1-307-257-9447

Double rifles make Africa safe enough for bolt guns!
 
Posts: 495 | Location: Gillette,Wyoming | Registered: 16 May 2007Reply With Quote
one of us
posted Hide Post
After trying both firms listed, I will now exclusively use Shane Thompson.
 
Posts: 990 | Location: AL | Registered: 13 January 2003Reply With Quote
One of Us
Picture of ACRecurve
posted Hide Post
quote:
Originally posted by h2oboy:
The only problem that I have had with them is delivery time. You may get it in 6 months....maybe.
If they were not the only ones doing a stock for a CZ 55O I would not use them.


Donny Gemes of Showme Gunstocks in Warsaw, MO has a pattern for the CZ550's. He's got a pretty good selection of blanks, too. Formerly worked for Fajen.


Good hunting,

Andy

-----------------------------
Thomas Jefferson: “To compel a man to furnish funds for the propagation of ideas he disbelieves and abhors is sinful and tyrannical.”

 
Posts: 6711 | Location: Oklahoma, USA | Registered: 14 March 2001Reply With Quote
One of Us
posted Hide Post
+1 for Show-Me and Donnie Gemes. Give him a call and discuss your needs.

Donnie Gemes
Show-Me Gunstocks
19557 Quail Ridge Rd
Warsaw, MO 65355
(660) 438-4568


Jim
 
Posts: 1210 | Location: Memphis, TN | Registered: 25 January 2008Reply With Quote
one of us
Picture of ramrod340
posted Hide Post
quote:
Donny Gemes of Showme Gunstocks in Warsaw, MO has a pattern for the CZ550's. He's got a pretty good selection of blanks, too. Formerly worked for Fajen

They shaped and inletted a blank for me and did a great job at a good price.


As usual just my $.02
Paul K
 
Posts: 12881 | Location: Mexico, MO | Registered: 02 April 2001Reply With Quote
One of Us
Picture of kcstott
posted Hide Post
With recommendations like that It puts me back in my plan of building a Duplicator.

I got a stock from Impingement that was a Microfit stock. Good stock, Nothing fancy, good inleting, great price and only waited a couple of weeks for Jim to ship. Beats the hell out of six months


www.KLStottlemyer.com

Deport the Homeless and Give the Illegals citizenship. AT LEAST THE ILLEGALS WILL WORK
 
Posts: 2534 | Location: National City CA | Registered: 15 December 2008Reply With Quote
one of us
Picture of 500nitro
posted Hide Post
Thanks for the intel guys.
I would be looking for a classic stock for a ZKK 602, and not everyone makes them.
It is a new caliber 460 Bauer, based on a 3" long 404 Jeff case necked down to 458.

I generally judge companies on their response time on enquiries. So far Rifle-Stocks.com and Gunstocks.com are not doing well.

I will drop the other lads mentioned a line.

cheers,


Harris Safaris
PO Box 853
Gillitts
RSA 3603

www.southernafricansafaris.co.za
https://www.facebook.com/pages...=aymt_homepage_panel

"There is something about safari life that makes you forget all your sorrows and feel as if you had drunk half a bottle of champagne." - Karen Blixen,
 
Posts: 1069 | Location: Durban,KZN, South Africa | Registered: 16 January 2001Reply With Quote
One of Us
posted Hide Post
500 Nitro, call Donnie Gemes and he will talk with you. If you try to write it will take a long time.


Jim
 
Posts: 1210 | Location: Memphis, TN | Registered: 25 January 2008Reply With Quote
One of Us
Picture of h2oboy
posted Hide Post
quote:
Originally posted by ACRecurve:
quote:
Originally posted by h2oboy:
The only problem that I have had with them is delivery time. You may get it in 6 months....maybe.
If they were not the only ones doing a stock for a CZ 55O I would not use them.


Donny Gemes of Showme Gunstocks in Warsaw, MO has a pattern for the CZ550's. He's got a pretty good selection of blanks, too. Formerly worked for Fajen.


Thanks for the info! I will be calling him.


Dirk Schimmel
D Schimmel LLC
Dirk@DoubleRifles.Us
1-307-257-9447

Double rifles make Africa safe enough for bolt guns!
 
Posts: 495 | Location: Gillette,Wyoming | Registered: 16 May 2007Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia