What would be the best brand of Stripped Lower to buy, if the intent was to build a highly accurate AR15. California regs need not apply.

Also, is there some type of valve that can be installed in the gas system of the AR that a user could close, and cause the rifle to fire as more of a straight-pull bolt action?

------------------
Safety & Ethics,Accuracy, Velocity, Energy
Joe M

Frank did a trigger job for $90 that involves replacing aluminum with carbide wher it counts. An absolutely perfect trigger. I also got a 1:8 24 inch heavy Krieger barreled upper.

The thing shoots sub-moa ten shot groups with any reasonable bullet. With 80 gr. Sierras I get ten shot groups in the fives. It never had a group over an inch until I tried some PMC factory loads - two inches!

I never tried to shut off the gas system - I can't see why I'd want to.

Don

Mike

quote:

---

Originally posted by JoeM:
Also, is there some type of valve that can be installed in the gas system of the AR that a user could close, and cause the rifle to fire as more of a straight-pull bolt action?

---

JP Enterprises makes an adjustable gas block that would work. You can adjust the gas flow, but not as a "valve" type deal. It involves a set screw. A bit more work, but if you really want the option, it's your best bet.

www.fultonarmory.com

------------------
Happiness is a 200 yard bughole.