one of us
| Thos. M. Burgess in Montana makes one I believe. I think he even mentioned something about the triggers too. I am not sure his cost on the safety, but if you have ever seen his work you know it doesn't get any better. He posts here as systeme98. I'll see if I can find out some more for you.
Red |
| Posts: 4742 | Location: Fresno, CA | Registered: 21 March 2003 |
IP
|
|
One of Us
| I find the cz trigger fine, what advantage does this AHR unti offer ?? |
| |
one of us
| The AHR trigger moves the trigger face way to the back of the trigger guard. It keeps your knuckle from hitting the bolt handle with a hard recoiling gun(.600OK). The bolt handle will be bent straight and the knob filled in on this rifle. |
| Posts: 273 | Location: Clarks Summit, Pa. | Registered: 17 December 2003 |
IP
|
|
one of us
| I tried to search for jwisner but got no hits on the search page. Have any contact info? |
| Posts: 273 | Location: Clarks Summit, Pa. | Registered: 17 December 2003 |
IP
|
|
one of us
| Try jwisner@quik.com . His safety includes a new cocking piece as CZ cocking pieces will not work in a M98 shroud without effort. It also includes a blank to fill the gap in the metal after you remove the safety rocker in the CZ trigger asembly. About $220 USD. He also is making some Rigby floorplates for the CZ triggerguard to improve capacity. As for triggers, I will need to try my new stock to decide about trigger position. P.S.: I don't have a piece of his company; I just like what he and some others here produce. |
| Posts: 11143 | Location: Texas, USA | Registered: 22 September 2003 |
IP
|
|
One of Us
| Seems like J Wisner has some nice goodies for the CZ's !! |
| |
one of us
| Hi George Danie Joubert , Master Riflemaker in Pretoria , South Africa makes 3 position safeties for the Brno's and the CZ 550's . You can e-mail him at fineguns@lantic.net of call him on +27 12 807 4892. Hope this helps . Brad |
| Posts: 318 | Location: South Africa | Registered: 12 February 2004 |
IP
|
|