Go | New | Find | Notify | Tools | Reply |
One of Us |
I have a 1908 DWM 98 that is pitted in a couple of places. Can Cerokote cover up pits? Thinking this could make a utilitarian all weather rifle with a stainless synthestic set up. Even if the pits could be noticed, it would still be quite usable. Matt FISH!! Heed the words of Winston Smith in Orwell's 1984: "Every record has been destroyed or falsified, every book rewritten, every picture has been repainted, every statue and street building has been renamed, every date has been altered. And the process is continuing day by day and minute by minute. History has stopped. Nothing exists except an endless present in which the Party is always right." | ||
|
One of Us |
Cerakote goes on VERY thin, it probably won't cover up the pitting. I'm had good luck using JB Weld to fill in small pitting areas on Cerakoting over it. | |||
|
One of Us |
Thanks for the advice! Matt FISH!! Heed the words of Winston Smith in Orwell's 1984: "Every record has been destroyed or falsified, every book rewritten, every picture has been repainted, every statue and street building has been renamed, every date has been altered. And the process is continuing day by day and minute by minute. History has stopped. Nothing exists except an endless present in which the Party is always right." | |||
|
One of Us |
To say Cerokote is thin is an understatement. That stuff sprays on so thin if you use to heavy of a grit to sand blast it won't cover the peaks. The stuff is water thin and does nothing to fill in imperfects. I have had good luck using spotting putty to fill in imperfections on fishing reel frames and cerokoteing them. I don't recommend doing this on a firearm you will sell with out full disclosure www.KLStottlemyer.com Deport the Homeless and Give the Illegals citizenship. AT LEAST THE ILLEGALS WILL WORK | |||
|
One of Us |
Thanks. Matt FISH!! Heed the words of Winston Smith in Orwell's 1984: "Every record has been destroyed or falsified, every book rewritten, every picture has been repainted, every statue and street building has been renamed, every date has been altered. And the process is continuing day by day and minute by minute. History has stopped. Nothing exists except an endless present in which the Party is always right." | |||
|
one of us |
Wow, I guess I got a bad Cerakote job then. Mine was so thick that I had to stone it off the bolt to get it to fit back down the raceway and close. Had to stone it off the lugs too. Live and learn. Larry "Peace is that brief glorious moment in history, when everybody stands around reloading" -- Thomas Jefferson | |||
|
one of us |
The bolt and lugs were Ceracoted?! Jason "You're not hard-core, unless you live hard-core." _______________________ Hunting in Africa is an adventure. The number of variables involved preclude the possibility of a perfect hunt. Some problems will arise. How you decide to handle them will determine how much you enjoy your hunt. Just tell yourself, "it's all part of the adventure." Remember, if Robert Ruark had gotten upset every time problems with Harry Selby's flat bed truck delayed the safari, Horn of the Hunter would have read like an indictment of Selby. But Ruark rolled with the punches, poured some gin, and enjoyed the adventure. -Jason Brown | |||
|
One of Us |
Yeah I'd say you did. Here's the deal The people at Cerokote thell you to practice with a small screw 10-32 paint eh treads and bake it. And if you have good color coverage and you van thread the nut on by hand you have the correct coating thickness. Even still the bolt should not have been coated let alone the lugs. Most commercial rifles don't have the clearance needed to coat the bolt. Cerokote goes on at a thickness of .0005" to .001" at the most so over all you could have a .001" to .002" build up. Not good on a bolt. You sure it wasn't Durakote?? that stuff goes on thick www.KLStottlemyer.com Deport the Homeless and Give the Illegals citizenship. AT LEAST THE ILLEGALS WILL WORK | |||
|
Powered by Social Strata |
Please Wait. Your request is being processed... |
Visit our on-line store for AR Memorabilia