THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Siamese Mauser in .450 Alaskan
 Login/Join
 
one of us
Picture of 3584ELK
posted
Gents,

I ended up with a Siamese Mauser that has been converted to .450 Alaskan. It doesn't feed worth a hoot, but I would like to fiddle with it and make it a short range thumper. The military stock is split and in horrible condition. Would a '98 Mauser replacement stock work with this action?

Any hints/ suggestions would be very welcome!
 
Posts: 602 | Location: Lake Andes, SD | Registered: 15 April 2004Reply With Quote
One of Us
posted Hide Post
Just finished a Siam in 45/70. There's enough difference between the Siam 98 and a "standard" 98 that I would say they are somewhat close, but not even a cigar. The magazine box is different as well as the action length. GAG and RMF both offer semi-inletted stocks for the Siamese action. Save yourself a lot of grief and get a semi inletted stock specifically cut for the Siam action.
 
Posts: 8169 | Location: humboldt | Registered: 10 April 2002Reply With Quote
one of us
Picture of 3584ELK
posted Hide Post
Craig,

Thanks for the help, can you post the links for the two businesses you mentioned? I like the idea of a semi- inletted stock also.

What did you have to do to get your rifle to feed properly?

Thanks again,

Mark
 
Posts: 602 | Location: Lake Andes, SD | Registered: 15 April 2004Reply With Quote
one of us
Picture of M1Tanker
posted Hide Post
Here are the links to the stock companies
Great American - www.gunstocks.com
Richards Micro-Fit - www.rifle-stocks.com
 
Posts: 3156 | Location: Rigby, ID | Registered: 20 March 2004Reply With Quote
One of Us
posted Hide Post
3584ELK,
Great American Gunstocks, www.gunstocks.com, Richard's Microfit Stocks, www.rifle-stocks.com. I got my stock from GAG. As far as the feeding issue goes, it involves modification to the feed rails and sometimes the follower. I'm not real familiar with the 450 AK so I really can't comment on how to make that round feed in the Siam. There are other posters here that can help with that, I'm sure. Once you get that baby spiffed out, you'll have lots of fun, I really enjoy mine.
 
Posts: 8169 | Location: humboldt | Registered: 10 April 2002Reply With Quote
one of us
Picture of 3584ELK
posted Hide Post
Craig/ M1Tanker,

Thanks for the input! I will begin my project soon...I just finished turning an old Enfield into a "loaner" hunting rifle by repairing the fore stock, bedding it, and rechambering to .303 Epps. Now on to this Mauser.

It keeps me off the streets and out of the bars!
 
Posts: 602 | Location: Lake Andes, SD | Registered: 15 April 2004Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia