THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
Pipe burner alternative for rust bluing
 Login/Join
 
one of us
posted
Natural gas pipe burners at Trinidad lit easy and heated tanks to boiling quickly. My LP burner requires running a flame across each orifice in the pipe and then takes several minutes to reach a boil.

Should I look at changing the regulator, or is there another option? I saw a picture of a tank on a pair of camp stoves for rust bluing. Anyone want to comment on how that works? Only have to light 4 burners that way, in any case.

Thanks,
Steve
 
Posts: 1734 | Location: Maryland | Registered: 17 January 2004Reply With Quote
One of Us
posted Hide Post
Maybe the LP burner has a NatGas orifice installed in place. Lets too much gas in and you get poor combustion.

A bad regulator is also a possibility.
You shouldn't have to light each port on the burner like a candelabra to get the thing going.
 
Posts: 566 | Registered: 08 June 2008Reply With Quote
one of us
Picture of Scrollcutter
posted Hide Post
Another option is an electric immersion heater. I have one that's 20yrs old and still going. More of a professional unit though, as they are a bit spendy.


Roger Kehr
Kehr Engraving Company
(360)456-0831
 
Posts: 1634 | Location: Washington State | Registered: 29 December 2002Reply With Quote
one of us
posted Hide Post


I use a 180,000 btu turkey fryer LP burner under this rig. Boils in 4 minutes, steam for 10, job done. No water issues. The burner can also be used for cooking. I can hang a barreled action inside the pipe, and use it as a sweat box by putting water in the pot between rustings. Total cost = $26 for the rig and $25 for the burner.
 
Posts: 3823 | Location: SC,USA | Registered: 07 March 2002Reply With Quote
One of Us
Picture of richj
posted Hide Post
Bobster

Cool boiler.

Steve

I have a 6x6x36" SS pan that I sat on a Garcia 2 burner LP stove. It takes way too long to boil.
 
Posts: 6518 | Location: NY, NY | Registered: 28 November 2005Reply With Quote
One of Us
posted Hide Post
Yeah, and you can use it to cook snakes.
 
Posts: 2827 | Location: Seattle, in the other Washington | Registered: 26 April 2006Reply With Quote
one of us
posted Hide Post
I was thinking more like a 48" Kielbasa.

quote:
Originally posted by Brice:
Yeah, and you can use it to cook snakes.
 
Posts: 3823 | Location: SC,USA | Registered: 07 March 2002Reply With Quote
One of Us
posted Hide Post
Propane is heavier than air. You need some
sort of trough running along side the orifaces
to conduct the fire.
 
Posts: 1028 | Location: Mid Michigan | Registered: 08 January 2005Reply With Quote
One of Us
Picture of RayGunter
posted Hide Post
Bobster, what a great idea. Can you tell us more about your pipe ?


Ray

...look up, and lift up your heads; for your redemption draweth nigh.
 
Posts: 117 | Location: Republic of Texas | Registered: 04 January 2005Reply With Quote
one of us
posted Hide Post
It is very simple to build. Just use stock three inch cellular core pvc pipe(36-48 in. long), cap, and a toilet flange. A 1/2 in pvc cross-bar is notched into the cap and pipe. The flange is secured to the lid of a flat-topped stock pot I bought at a dollar store. Drill some holes thru the lid to allow steam to enter the pipe. I call it: "Bob's Big Johnson Barrel Steamer". Smiler
 
Posts: 3823 | Location: SC,USA | Registered: 07 March 2002Reply With Quote
one of us
posted Hide Post
Wow! That's great.

And the steam blackens the rust, just like boiling in water?

Thanks,
Steve
 
Posts: 1734 | Location: Maryland | Registered: 17 January 2004Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia