The Accurate Reloading Forums
Interarms Mark X Parts

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/5721052442

28 July 2018, 18:49
squeezenhope
Interarms Mark X Parts
I have inherited a barreled action that is missing the floorplate latch, latch pin, and latch spring.
Is there a source for these parts? I can make do for a pin and spring, but would sure like to find a latch.
29 July 2018, 06:54
4sixteen
Interarms Mark X same as Remington 798 / Zastava LKM70. Currently listed in stock.

https://www.gunpartscorp.com/products/1208080D

https://www.gunpartscorp.com/products/1208540B




416 Rem Mag custom Zastava LKM70 Full Stock Carbine with Nikon Monarch 1.5-4.5x20mm

29 July 2018, 07:42
Rolland
If your interested I have a stock listed in classified that will fit that action. Smiler


Never rode a bull, but have shot some.

NRA life member
NRA LEO firearms instructor (retired)
NRA Golden Eagles member
29 July 2018, 09:37
4sixteen
Right, and as shown in this link. Also currently listed in stock.

https://www.gunpartscorp.com/products/881550D
29 July 2018, 17:42
jeffeosso
quote:
Originally posted by 4sixteen:
Right, and as shown in this link. Also currently listed in stock.

https://www.gunpartscorp.com/products/881550D


NON-interarms parts - these are CRAP ... cast and poor fitting junk .. terrible ..


opinions vary band of bubbas and STC hunting Club


Words aren't Murder - Political assassination is MURDER
Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
29 July 2018, 19:41
squeezenhope
I need the old style latch, 09 type.
30 July 2018, 06:11
squeezenhope
PM sent.
01 August 2018, 00:16
KenT7021
Numrich has a Santa Barbara Parker Hale release listed under 98 Mauser parts that might work.It is the old type.
01 August 2018, 02:58
Bobster
Here is the link: https://www.gunpartscorp.com/products/1482020A


quote:
Originally posted by KenT7021:
Numrich has a Santa Barbara Parker Hale release listed under 98 Mauser parts that might work.It is the old type.

02 August 2018, 01:36
squeezenhope
Thanks for everyone's help.
16 August 2018, 20:14
squeezenhope
Lindy2, I received it and thanks.
16 August 2018, 21:44
Redoak8
quote:
Originally posted by squeezenhope:
Lindy2, I received it and thanks.


squeezenhope,

Is the one that you received steel?

If so, does it appear to be machined or cast?

Thanks
17 August 2018, 06:05
squeezenhope
Part is steel, appears machined. Lindy can provide more info if he is so inclined.
17 August 2018, 12:41
Redoak8
squeezenhope,

How does your new latch fit your Mark X guard? Does it drop right in?

Thanks
17 August 2018, 19:30
squeezenhope
Redoak8, the part is NOT a drop in. I believe Lindy had it made by a gunsmith for a project.
18 August 2018, 03:46
Redoak8
quote:
Originally posted by Bobster:
Here is the link: https://www.gunpartscorp.com/products/1482020A


quote:
Originally posted by KenT7021:
Numrich has a Santa Barbara Parker Hale release listed under 98 Mauser parts that might work.It is the old type.


Sorry, I thought that you ordered one of these from GunParts Corp., that is why I was asking, I was thinking about ordering a couple.