The Accurate Reloading Forums THE ACCURATE RELOADING.COM FORUMS Guns, Politics, Gunsmithing & Reloading Gunsmithing Myrtle?Go | New | Find | Notify | Tools | Reply | |
| Myrtle? | Login/Join |
One of Us |
How would some myrtle wood work for a 375 H&H? I have read most of the posts I can find and I see that there is a concern of warping. Living in Montana where the humidity is generally low should I be concerned about this? "I would rather have a German division in front of me than a French one behind me." -- General George S. Patton | ||
|
One of Us |
Absolutely any wood can warp on you....I've even had laminated wood warp on me!!! I think myrtle can be a beautiful wood and if the grain was right through the "wrist" of the stock, I wouldn't hesitate to use it for a .375 H&H Like any wood....it must be dried for the task! /////////////////////////////////////////////////////////////////////////// "Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery." Winston Churchill | |||
|
| One of Us |
I love myrtlewood stocks! I own two, one is on a FN action Winslow .257 Weatherby, and the other is a custom VZ-24 9.3x62mm Mauser. Works great, looks greater, lasts a long time. The 9.3x62mm has done Africa, while the .257 has only done Woodchucks. LLS  | |||
|
| One of Us |
This wood brings back old memories. Roberts Wood Products used to sell quite a bit of it. Kurt Haase used it some as well as Nels Largent. I did a few for cusomers, never liked the color that much, but it sure can be striking. I would see no reason when properly inletted and with cross bolts you couldn't use a good piece for a 375...it also smells nice when workng it | |||
|
| One of Us |
Thanks guys, I don't suppose anyone has pictures I could drool over do you? I am having a hard time finding good pictures of the wood actually on the gun. Most of them have bee deleted by the host. "I would rather have a German division in front of me than a French one behind me." -- General George S. Patton | |||
|
One of Us |
 It's a 2 pc blank that i don't have a project for, when i seen it , i knew i had to have it. would like to find its sister in a one piece blank! _____________________ Steve Traxson | |||
|
| One of Us |
thanks srtrax, that is some beautiful wood. "I would rather have a German division in front of me than a French one behind me." -- General George S. Patton | |||
|
| One of Us |
The key with " almost " any wood one chooses to use for a stock is it must be fully dried and near straight to begin with . After letting the stock and all prep work is completed SEALING THE ENTIRE STOCK is paramount , Regardless of finish chosen IMO !. Shoot Straight Know Your Target . ...  | |||
|
One of Us |
For what it is worth, here are two Myrtle wood stocked FN Weatherbys, circa 1956. Both are more beautiful today than when they were new and have held up after all these years.  Rusty We Band of Brothers! DRSS, NRA & SCI Life Member "I am rejoiced at my fate. Do not be uneasy about me, for I am with my friends." ----- David Crockett in his last letter (to his children), January 9th, 1836 "I will never forsake Texas and her cause. I am her son." ----- Jose Antonio Navarro, from Mexican Prison in 1841 "for I have sworn upon the altar of god eternal hostility against every form of tyranny over the mind of man." Thomas Jefferson Declaration of Arbroath April 6, 1320-“. . .It is not for glory, nor riches, nor honours that we are fighting, but for freedom - for that alone, which no honest man gives up but with life itself.” | |||
|
| One of Us |
Well i just won one of those Roberts Wood Myrtle stocks, I think. That is what it was listed as anyways. It is unfinished and semi-inletted. http://www.gunbroker.com/auction/ViewItem.asp?Item=97930736 I hope it is all as listed. Will soon find out I guess "I would rather have a German division in front of me than a French one behind me." -- General George S. Patton | |||
|
| One of Us |
George, nice win, looks well figured from what i can tell from auction sight. Post some better pictures of stock if you can, or better yet the finished rifle.  What, should only take a couple days!!!_____________________ Steve Traxson | |||
|
| one of us |
My impression is that myrtle was much more popular in the 50s and 60s than it has been subsequently. | |||
|
One of Us |
FWIW - Cecil Fredi has a bunch of Myrtlewood blanks including a few tiger and black myrtle. http://www.gunstockblanks.com/Wood.htm | |||
|
| Powered by Social Strata |
 | Please Wait. Your request is being processed... |
|
Visit our on-line store for AR Memorabilia