THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
bedding?
 Login/Join
 
One of Us
posted
Gents!
I have just bedded and released the action and barrel from the mcmillan stock. The question is if I should make another bedding point under the barrel recoil lug?
As of now it is bedded under the tang and from the magazine box and forward until the barrel tapers out.

It is a .375HH in a CZ-express stock, in which I had to use the dremel quite a lot to correct the errors made by McMillan in the alignment of the barrel channel and the position of the barrel recoil lug. Therefore it is a bit of space lacking under the barrel.

Shall I fill this space with epoxi to make the forestock stiffer?

Sincerely
Daniel
 
Posts: 271 | Location: 68°N, Lapland Sweden | Registered: 17 March 2005Reply With Quote
one of us
Picture of ROSCOE
posted Hide Post
You should bed the recoil lug...if you have dremeled the material around it...the lug will be useless until it is bedded.


******************************************************************
R. Lee Ermey: "The deadliest weapon in the world is a Marine and his rifle."
******************************************************************
We're going to be "gifted" with a health care plan we are forced to purchase and fined if we don't, Which purportedly covers at least ten million more people, without adding a single new doctor, but provides for 16,000 new IRS agents, written by a committee whose chairman says he doesn't understand it, passed by a Congress that didn't read it but exempted themselves from it, and signed by a President, with funding administered by a treasury chief who didn't pay his taxes, for which we'll be taxed for four years before any benefits take effect, by a government which has already bankrupted Social Security and Medicare, all to be overseen by a surgeon general who is obese, and financed by a country that's broke!!!!! 'What the hell could possibly go wrong?'
 
Posts: 2122 | Location: Arkansas | Registered: 03 June 2000Reply With Quote
One of Us
posted Hide Post
You do not need to bed UNDER the recoil lug. Bed behind it.


Chic Worthing
"Life is Too Short To Hunt With An Ugly Gun"
http://webpages.charter.net/cworthing/
 
Posts: 4917 | Location: Wenatchee, WA, USA | Registered: 17 December 2001Reply With Quote
one of us
Picture of hivelosity
posted Hide Post
this is what it should start to look like.
http://hunt101.com/img/380067.JPG
 
Posts: 2134 | Location: Ohio | Registered: 26 June 2000Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia