THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
what angle dovetail cutter for sights?
 Login/Join
 
DLH4570
One of Us
posted
What is the normal angles to cut a dove tail slot in a 1911 frame. IE 45deg or 60deg?


Live every day like it was your last, because someday it will be!!!
 
Posts: 140 | Location: N. E. Ohio | Registered: 04 January 2005Reply With Quote
Jim Kobe
One of Us
posted Hide Post
In a frame or a slide? It could be 60° or even 69°


Jim Kobe
10841 Oxborough Ave So
Bloomington MN 55437
952.884.6031
Professional member American Custom Gunmakers Guild

 
Posts: 5531 | Location: Minnesota | Registered: 10 July 2002Reply With Quote
M Pursell
one of us
posted Hide Post
Some 1911 sights are 60,some are 65.


Mark Pursell
 
Posts: 545 | Location: Liberty, MO | Registered: 21 January 2003Reply With Quote
DLH4570
One of Us
posted Hide Post
Are most sights in the 60s? Any suggestions on where to order one?


Live every day like it was your last, because someday it will be!!!
 
Posts: 140 | Location: N. E. Ohio | Registered: 04 January 2005Reply With Quote
Toomany Tools
one of us
Picture of Toomany Tools
posted Hide Post
There is no "standard" for aftermarket sights but most are eith 65 or 60 degree, some are 74 degrees. Width and depth vary too, from .245" wide to .330. Carbide sight cutters are worth the investment as slides can be hard.


John Farner

If you haven't, please join the NRA!
 
Posts: 2946 | Location: Corrales, NM, USA | Registered: 07 February 2001Reply With Quote
Jim Kobe
One of Us
posted Hide Post
quote:
Originally posted by DLH4570:
Are most sights in the 60s? Any suggestions on where to order one?


Brownell's


Jim Kobe
10841 Oxborough Ave So
Bloomington MN 55437
952.884.6031
Professional member American Custom Gunmakers Guild

 
Posts: 5531 | Location: Minnesota | Registered: 10 July 2002Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia