THE ACCURATERELOADING.COM GUNSMITHING FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
ZKW-465 22 Hornet feeding problem.GOT IT
 Login/Join
 
One of Us
Picture of custombolt
posted
The last two rounds sit low in the back of the mag so that they aren't picked up by the bolt. I tried reversing the spring and lubing the rear wall. The cases show some scratching around the shoulder. However, even on an empty mag the follower will only pop up to the proper position if the nose is bumped downward. There are no signs of friction inside. What am I missing? Magazine was new old stock.


Life itself is a gift. Live it up if you can.
 
Posts: 5246 | Location: Near Hershey PA | Registered: 12 October 2012Reply With Quote
One of Us
posted Hide Post
different spring??
 
Posts: 13463 | Location: faribault mn | Registered: 16 November 2004Reply With Quote
One of Us
Picture of custombolt
posted Hide Post
Couldn't find any even for a CZ-527. Plus, I hear some of those hang up too.


Life itself is a gift. Live it up if you can.
 
Posts: 5246 | Location: Near Hershey PA | Registered: 12 October 2012Reply With Quote
One of Us
Picture of custombolt
posted Hide Post
Got it. Had to re-shape the spring end at the top.


Life itself is a gift. Live it up if you can.
 
Posts: 5246 | Location: Near Hershey PA | Registered: 12 October 2012Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia