The Accurate Reloading Forums
Savage Firing Pin

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/9411043/m/5391086952

24 May 2020, 01:38
DannoBoone
Savage Firing Pin
I have a friend looking for a Savage 10MLII firing pin, which would no longer
be available. Since much of the receiver was the same as Mod's 10 and 12, did
the 10MLII have the same firing pin?


************************

Our independence is dying.
24 May 2020, 05:41
Bobster
Check www.gunpartscorp.com
They have tons of old Savage parts. Temporarily closed due to Covid 19 but will eventually reopen.
24 May 2020, 07:03
jimatcat
Jacks First... they probably wont have the part... BUT,, they will have the part number.. which Savage won't,,, then look on ebay and you'll probably find it... I needed the rear action screw for mine.. it also acts as the boltstop… Savage no longer supports the ML10... but I found it on ebay… with the part number that Jacks First gave me....... they know their parts...


go big or go home ........

DSC-- Life Member
NRA--Life member
DRSS--9.3x74 r Chapuis
24 May 2020, 07:44
TomP
Does someone have a drawing of it, to make more?


TomP

Our country, right or wrong. When right, to be kept right, when wrong to be put right.

Carl Schurz (1829 - 1906)
26 May 2020, 20:15
farbedo
Should be the same. I'll pull my 10ML2 apart this evening and check.

Jeremy
27 May 2020, 02:45
farbedo
Not the same. The tip is fat and the length is 4.375". I think that is about .375" shorter than the standard 10 pin.

I would be surprised if you couldn't make it out of a standard pin, though.

Hope that helps. I don't have a short action Savage to check, just long actions and the muzzleloader.

Jeremy